Case-IH Magnum 7120 vs International Harvester 1586

14 material differences

Tractor one

1988–1993

No measured PTO figure

Tractor two

1976–1981

No measured PTO figure

Which should you choose?

Read our verdict on the Magnum 7120 and the 1586 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 1 fields identical or within 5%, which is not counted as material

Case-IH Magnum 7120 and International Harvester 1586, field by field
Field	Magnum 7120	1586	Gap
Engine
Engine power, claimed claimed	177.6 hp	161 hp	+10% Magnum 7120
Engine declared	CUMMINS 6 T-830	INTERNATIONAL HARVESTER DT-436	differs
Displacement declared	8.27 L	7.14 L	+16% Magnum 7120
Maximum torque declared	493 lb·ft · 669 N·m	456 lb·ft · 618 N·m	+8% Magnum 7120
Transmission
Top speed declared	19.9 mph · 32 km/h	18.6 mph · 30 km/h	+7% Magnum 7120
Clutch declared	Oil-immersed Case-IH multi-plate clutch with nine plates	—	—
Hydraulics & hitch
Pump flow declared	28.5 gpm · 108.0 L/min	12.0 gpm · 45.4 L/min	+138% Magnum 7120
Pressure declared	2,625 psi · 181 bar	—	—
Three-point lift at ends declared	14,661 lb · 6,650 kg	7,077 lb · 3,210 kg	+107% Magnum 7120
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	16,605 lb · 7,532 kg	15,119 lb · 6,858 kg	+10% Magnum 7120
Maximum permissible mass declared	25,519 lb · 11,575 kg	—	—
Wheelbase declared	118.3 in · 3,006 mm	104.8 in · 2,662 mm	+13% Magnum 7120
Length declared	199.1 in · 5,056 mm	169.0 in · 4,293 mm	+18% Magnum 7120
Width declared	112.0 in · 2,845 mm	102.0 in · 2,591 mm	+10% Magnum 7120
Height declared	118.3 in · 3,006 mm	116.0 in · 2,946 mm	—
Ground clearance declared	16.1 in · 410 mm	14.0 in · 356 mm	+15% Magnum 7120
Turning radius, braked declared	14.7 ft · 4.47 m	11.2 ft · 3.40 m	+31% Magnum 7120
Fuel tank declared	311.7 qt · 295.0 L	252.0 qt · 238.5 L	+24% Magnum 7120

Source

Source