Case-IH Magnum 7120 vs Fiat 180-90 (DT)

13 material differences

Tractor one

1988–1993

No measured PTO figure

Tractor two

1984–1994

No measured PTO figure

Which should you choose?

Read our verdict on the Magnum 7120 and the 180-90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH Magnum 7120 and Fiat 180-90 (DT), field by field
Field	Magnum 7120	180-90 (DT)	Gap
Engine
Engine power, claimed claimed	177.6 hp	177.7 hp	—
Engine declared	CUMMINS 6 T-830	FIAT-IVECO 8365.25.502	differs
Displacement declared	8.27 L	8.10 L	—
Maximum torque declared	493 lb·ft · 669 N·m	459 lb·ft · 622 N·m	+8% Magnum 7120
Transmission
Top speed declared	19.9 mph · 32 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Oil-immersed Case-IH multi-plate clutch with nine plates	Pedal-operated hydraulic dry LUK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	28.5 gpm · 108.0 L/min	13.4 gpm · 50.8 L/min	+113% Magnum 7120
Pressure declared	2,625 psi · 181 bar	3,046–3,118 psi · 210–215 bar	differs
Three-point lift at ends declared	14,661 lb · 6,650 kg	14,551 lb · 6,600 kg	—
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	16,605 lb · 7,532 kg	13,955 lb · 6,330 kg	+19% Magnum 7120
Maximum permissible mass declared	25,519 lb · 11,575 kg	22,046 lb · 10,000 kg	+16% Magnum 7120
Wheelbase declared	118.3 in · 3,006 mm	116.7 in · 2,963 mm	—
Length declared	199.1 in · 5,056 mm	189.8 in · 4,820 mm	—
Width declared	112.0 in · 2,845 mm	80.7 in · 2,050 mm	+39% Magnum 7120
Height declared	118.3 in · 3,006 mm	115.4 in · 2,930 mm	—
Ground clearance declared	16.1 in · 410 mm	27.4 in · 695 mm	+70% 180-90 (DT)
Turning radius, braked declared	14.7 ft · 4.47 m	13.2 ft · 4.03 m	+11% Magnum 7120
Fuel tank declared	311.7 qt · 295.0 L	190.2 qt · 180.0 L	+64% Magnum 7120

Source

Source