14 material differences
Tractor oneCase-IH Magnum 71201988–1993No measured PTO figureTractor twoFendt 916 Vario2002–2006No measured PTO figure
Which should you choose?
Read our verdict on the Magnum 7120 and the 916 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
14 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Magnum 7120 | 916 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 177.6 hp | 177 hp | — |
| Engine declared | CUMMINS 6 T-830 | MAN D 0836 LE 501 | differs |
| Displacement declared | 8.27 L | 6.87 L | +20% Magnum 7120 |
| Maximum torque declared | 493 lb·ft · 669 N·m | 608 lb·ft · 825 N·m | +23% 916 Vario |
| Transmission | |||
| Top speed declared | 19.9 mph · 32 km/h | 31.1 mph · 50 km/h | +56% 916 Vario |
| Clutch declared | Oil-immersed Case-IH multi-plate clutch with nine plates | wet multi-plate clutch as PTO clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 28.5 gpm · 108.0 L/min | 29.6 gpm · 112 L/min | — |
| Pressure declared | 2,625 psi · 181 bar | 2,901 psi · 200 bar | +10% 916 Vario |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 16,605 lb · 7,532 kg | 19,290 lb · 8,750 kg | +16% 916 Vario |
| Maximum permissible mass declared | 25,519 lb · 11,575 kg | 30,865 lb · 14,000 kg | +21% 916 Vario |
| Wheelbase declared | 118.3 in · 3,006 mm | 111.8 in · 2,840 mm | +6% Magnum 7120 |
| Length declared | 199.1 in · 5,056 mm | 194.5 in · 4,940 mm | — |
| Width declared | 112.0–120.8 in · 2,845–3,069 mm | 100.4 in · 2,550 mm | differs |
| Ground clearance declared | 16.1 in · 410 mm | 23.8 in · 605 mm | +48% 916 Vario |
| Turning radius, braked declared | 14.7 ft · 4.47 m | 17.7 ft · 5.40 m | +21% 916 Vario |
| Fuel tank declared | 311.7 qt · 295.0 L | 560.0 qt · 530 L | +80% 916 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH Magnum 7120 sources
Source
- Source: Traktorenlexikon, “Case-IH 7120”
- Source: Traktorenlexikon, “Case-IH 7110”
Fendt 916 Vario sources
Source
- Source: Traktorenlexikon, “Fendt 916 Vario”
- Source: Traktorenlexikon, “Fendt 920 Vario”