13 material differences
Tractor oneCase-IH Magnum 71101988–1993No measured PTO figureTractor twoSOMECA 1580 (TD)1979–1983No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (25%); the drive differs (4WD; Two-wheel or four-wheel drive); they were not built in overlapping years (1988–1993; 1979–1983). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
13 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Magnum 7110 | 1580 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 153 hp | 152.9 hp | — |
| Engine declared | CUMMINS 6 T-830 | FIAT-IVECO 8365.25.500 or 8365.05.501 | differs |
| Displacement declared | 8.27 L | 8.10 L | — |
| Maximum torque declared | 421 lb·ft · 571 N·m | 423–456 lb·ft · 573–618 N·m | differs |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | oil-immersed multiple-disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 28.4 gpm · 107.6 L/min | 14.7 gpm · 55.8 L/min | +93% Magnum 7110 |
| Pressure declared | 2,944 psi · 203 bar | 3,336–3,481 psi · 230–240 bar | differs |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 16,590 lb · 7,525 kg | 13,228 lb · 6,000 kg | +25% Magnum 7110 |
| Maximum permissible mass declared | 24,912 lb · 11,300 kg | 22,046 lb · 10,000 kg | +13% Magnum 7110 |
| Wheelbase declared | 118.3 in · 3,006 mm | 116.7 in · 2,963 mm | — |
| Length declared | 197.6 in · 5,019 mm | 170.3 in · 4,325 mm | +16% Magnum 7110 |
| Width declared | 112.0–120.8 in · 2,845–3,069 mm | 85.0–108.7 in · 2,160–2,760 mm | differs |
| Height, over the cab declared | 117.4 in · 2,982 mm | 109.6 in · 2,785 mm | +7% Magnum 7110 |
| Ground clearance declared | 15.9 in · 404 mm | 27.4 in · 695 mm | +72% 1580 (TD) |
| Turning radius, braked declared | 15.6 ft · 4.75 m | — | — |
| Fuel tank declared | 311.7 qt · 295.0 L | 295.9 qt · 280.0 L | +5% Magnum 7110 |
Case-IH Magnum 7110 sources
Source
- Source: Traktorenlexikon, “Case-IH 7110”
SOMECA 1580 (TD) sources
Source
- Source: Traktorenlexikon, “Someca 1580”
- Source: Traktorenlexikon, “Fiat 1580 DT”