11 material differences · fewer than 12

Tractor oneCase-IH JX 65 (A)2002–2004No measured PTO figureTractor twoMassey Ferguson MF 377 (A)1987–1994No measured PTO figure

Which should you choose?

Read our verdict on the JX 65 (A) and the MF 377 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH JX 65 (A) and Massey Ferguson MF 377 (A), field by field
Field	JX 65 (A)	MF 377 (A)	Gap
Engine
Engine power, claimed claimed	61.2 hp	61.2 hp	—
Engine declared	IVECO 8035.05-406 (EURO II)	Perkins A 4.236	differs
Displacement declared	2.93 L	3.87 L	+32% MF 377 (A)
Maximum torque declared	130 lb·ft · 176 N·m	179 lb·ft · 243 N·m	+38% MF 377 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.7 gpm · 33.1 L/min	—	—
Pressure declared	1,450 psi · 100 bar	2,756 psi · 190 bar	+90% MF 377 (A)
Three-point lift, at the coupling points declared	7,859 lb · 3,565 kg	5,291 lb · 2,400 kg	+49% JX 65 (A)
Rear PTO speeds declared	540E/540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,010 lb · 2,726 kg	6,923 lb · 3,140 kg	+15% MF 377 (A)
Wheelbase declared	85.6 in · 2,175 mm	94.8 in · 2,409 mm	+11% MF 377 (A)
Length declared	142.4 in · 3,618 mm	155.9 in · 3,960 mm	+9% MF 377 (A)
Width declared	70.8–90.5 in · 1,799–2,299 mm	81.1 in · 2,060 mm	differs
Height, over the cab declared	100.6 in · 2,555 mm	103.9 in · 2,640 mm	—
Ground clearance declared	10.8 in · 275 mm	—	—
Turning radius, braked declared	13.8 ft · 4.20 m	—	—
Fuel tank declared	95.1 qt · 90.0 L	107.8 qt · 102.0 L	+13% MF 377 (A)

Source

Source