Case-IH JX 55 (A) vs Massey Ferguson MF 4215 (A)

10 material differences · fewer than 12

Tractor one

2002–2004

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the JX 55 (A) and the MF 4215 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH JX 55 (A) and Massey Ferguson MF 4215 (A), field by field
Field	JX 55 (A)	MF 4215 (A)	Gap
Engine
Engine power, claimed claimed	54.3 hp	51.4 hp	+6% JX 55 (A)
Engine declared	IVECO 8035.06-406 (EURO II)	Perkins 903.27	differs
Displacement declared	2.71 L	2.70 L	—
Maximum torque declared	115 lb·ft · 156 N·m	136 lb·ft · 184 N·m	+18% MF 4215 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	8.5 gpm · 32.2 L/min	—	—
Pressure declared	1,450 psi · 100 bar	2,031 psi · 140 bar	+40% MF 4215 (A)
Three-point lift at ends declared	5,935 lb · 2,692 kg	4,718 lb · 2,140 kg	+26% JX 55 (A)
Rear PTO speeds declared	540E/540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,822 lb · 2,641 kg	5,258 lb · 2,385 kg	+11% JX 55 (A)
Wheelbase declared	85.6 in · 2,175 mm	83.9 in · 2,130 mm	—
Length declared	140.6 in · 3,572 mm	149.0 in · 3,785 mm	+6% MF 4215 (A)
Width declared	70.8 in · 1,799 mm	78.0 in · 1,982 mm	+10% MF 4215 (A)
Height declared	100.6 in · 2,555 mm	99.0 in · 2,515 mm	—
Ground clearance declared	10.8 in · 275 mm	8.3 in · 210 mm	+31% JX 55 (A)
Turning radius, braked declared	13.8 ft · 4.20 m	—	—
Fuel tank declared	95.1 qt · 90.0 L	90.9 qt · 86.0 L	—

Source

Source