Case-IH JX1100U or Massey Ferguson MF 3085 A?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the JX1100U: power at the PTO, measured by a laboratory at maximum power (OECD Test 2278); the MF 3085 A: power at the PTO, claimed (Traktorenlexikon, “Massey Ferguson MF 3085”) — not the same quantity, basis and condition.

  • The Case-IH JX1100U suits loader and hydraulic implement work better on this data: 12% (6.5 L/min / 1.7 gpm) more hydraulic flow and 41% (1,481 kg / 3,265 lb) more three-point lift.
  • The Massey Ferguson MF 3085 A suits road haulage better on this data: 21% (1,300 kg / 2,866 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Case-IH JX1100U and Massey Ferguson MF 3085 A, with the call on each
QuestionJX1100UMF 3085 ACall
Which puts more power through the PTO shaft?65.7 kW (88.1 hp)OECD Test 227865.5 kW (87.8 hp)Traktorenlexikon, “Massey Ferguson MF 3085”Not comparableNot comparable on power at the PTO shaft: the JX1100U: power at the PTO, measured by a laboratory at maximum power (OECD Test 2278); the MF 3085 A: power at the PTO, claimed (Traktorenlexikon, “Massey Ferguson MF 3085”) — not the same quantity, basis and condition.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the JX1100U and the MF 3085 A.
Which pulls harder at the drawbar?52.9 kW (70.9 hp)OECD Test 2278No figureNo call on drawbar power: no figure on record for the MF 3085 A.
Which pumps more oil for implements?60.5 L/min (16.0 gpm)Traktorenlexikon, “Case-IH JX1100U”54.0 L/min (14.3 gpm)Traktorenlexikon, “Massey Ferguson MF 3085”AheadThe Case-IH JX1100U has 12% more hydraulic flow (6.5 L/min / 1.7 gpm) than the Massey Ferguson MF 3085 A (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?5,060 kg (11,155 lb)Traktorenlexikon, “Case-IH JX1100U”3,579 kg (7,891 lb)Traktorenlexikon, “Massey Ferguson MF 3085”AheadThe Case-IH JX1100U has 41% more lift (1,481 kg / 3,265 lb) than the Massey Ferguson MF 3085 A (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,960 kg (8,730 lb) to 4,125 kg (9,094 lb), varies by configurationTraktorenlexikon, “Case-IH JX1100U”4,750 kg (10,472 lb)Traktorenlexikon, “Massey Ferguson MF 3085”Ahead (a fact, not an advantage)The Massey Ferguson MF 3085 A is 15% heavier (625 kg / 1,378 lb) than the Case-IH JX1100U (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,200 kg (13,669 lb)Traktorenlexikon, “Case-IH JX1100U”7,500 kg (16,535 lb)Traktorenlexikon, “Massey Ferguson MF 3085”AheadThe Massey Ferguson MF 3085 A has 21% higher maximum permissible mass (1,300 kg / 2,866 lb) than the Case-IH JX1100U (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?12OECD test report 2278, 200532Traktorenlexikon, “Massey Ferguson MF 3085”AheadThe Massey Ferguson MF 3085 A has 167% more forward gears (20 gears) than the Case-IH JX1100U (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the JX1100U and the MF 3085 A.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Case-IH JX1100U”30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 3085”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540E/540/1000 rpmTraktorenlexikon, “Case-IH JX1100U”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 3085”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 3085”No figureNo call on PTO independence: not stated for the JX1100U.
Which drives on both axles?4WDOECD test report 2278, 2005; Traktorenlexikon, “Case-IH JX1100U”4WDTraktorenlexikon, “Massey Ferguson MF 3085”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2004–20081992–1995Ahead (a fact, not an advantage)The Case-IH JX1100U is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Case-IH JX1100U has 12% more hydraulic flow (6.5 L/min / 1.7 gpm) than the Massey Ferguson MF 3085 A (both pump flow, as stated by the source).
  • The Case-IH JX1100U has 41% more lift (1,481 kg / 3,265 lb) than the Massey Ferguson MF 3085 A (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson MF 3085 A is 15% heavier (625 kg / 1,378 lb) than the Case-IH JX1100U (both unladen weight, as stated by the source).
  • The Massey Ferguson MF 3085 A has 21% higher maximum permissible mass (1,300 kg / 2,866 lb) than the Case-IH JX1100U (both maximum permissible mass, as stated by the source).
  • The Massey Ferguson MF 3085 A has 167% more forward gears (20 gears) than the Case-IH JX1100U (both forward gears, as stated by the source).
  • The Case-IH JX1100U is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the JX1100U: power at the PTO, measured by a laboratory at maximum power (OECD Test 2278); the MF 3085 A: power at the PTO, claimed (Traktorenlexikon, “Massey Ferguson MF 3085”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources