Case-IH JX1090U or Deutz-Fahr AgroXtra 4.47?

Which should you choose?

The figures split: the Deutz-Fahr AgroXtra 4.47 is ahead on hydraulic flow and PTO speeds; the Case-IH JX1090U is ahead on three-point lift.

  • The Deutz-Fahr AgroXtra 4.47 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 750 rpm.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Case-IH JX1090U and Deutz-Fahr AgroXtra 4.47, with the call on each
QuestionJX1090UAgroXtra 4.47Call
Which puts more power through the PTO shaft?62.1 kW (83.3 hp)Traktorenlexikon, “Case-IH JX1090U”Measured less than 1% above its own claimed PTO figure (62.1 kW (83.3 hp), Traktorenlexikon, “Case-IH JX1090U”).59 kW (79 hp)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.47”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the JX1090U and the AgroXtra 4.47.
Which pulls harder at the drawbar?45.3 kW (60.7 hp)OECD Test 2279—No figureNo call on drawbar power: no figure on record for the AgroXtra 4.47.
Which pumps more oil for implements?62.3 L/min (16.5 gpm)Traktorenlexikon, “Case-IH JX1090U”74 L/min (19.5 gpm)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.47”AheadThe Deutz-Fahr AgroXtra 4.47 has 19% more hydraulic flow (11.7 L/min / 3.1 gpm) than the Case-IH JX1090U (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?5,060 kg (11,155 lb)Traktorenlexikon, “Case-IH JX1090U”3,800 kg (8,378 lb)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.47”AheadThe Case-IH JX1090U has 33% more lift (1,260 kg / 2,778 lb) than the Deutz-Fahr AgroXtra 4.47 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,855 kg (8,499 lb) to 4,255 kg (9,381 lb), varies by configurationTraktorenlexikon, “Case-IH JX1090U”3,780 kg (8,333 lb)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.47”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?6,200 kg (13,669 lb)Traktorenlexikon, “Case-IH JX1090U”6,600 kg (14,551 lb)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.47”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?12OECD test report 2279, 200515 to 18Traktorenlexikon, “Deutz-Fahr AgroXtra 4.47”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the JX1090U and the AgroXtra 4.47.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Case-IH JX1090U”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.47”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540E/540/1000 rpmTraktorenlexikon, “Case-IH JX1090U”540/1000/750 rpmTraktorenlexikon, “Deutz-Fahr AgroXtra 4.47”AheadThe Deutz-Fahr AgroXtra 4.47 offers 750 rpm at the PTO, which the Case-IH JX1090U does not (as stated by the sources).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Deutz-Fahr AgroXtra 4.47”No figureNo call on PTO independence: not stated for the JX1090U.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Case-IH JX1090U”4WDTraktorenlexikon, “Deutz-Fahr AgroXtra 4.47”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2004–20081993–1995Ahead (a fact, not an advantage)The Case-IH JX1090U is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr AgroXtra 4.47 has 19% more hydraulic flow (11.7 L/min / 3.1 gpm) than the Case-IH JX1090U (both pump flow, as stated by the source).
  • The Case-IH JX1090U has 33% more lift (1,260 kg / 2,778 lb) than the Deutz-Fahr AgroXtra 4.47 (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr AgroXtra 4.47 offers 750 rpm at the PTO, which the Case-IH JX1090U does not (as stated by the sources).
  • The Case-IH JX1090U is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources