Case-IH JX1080U vs VALMET 900

12 material differences

Tractor one

2004–2008

72.1 hp

Measured at the PTO · OECD Test 2280

Tractor two

1997–2002

No measured PTO figure

Which should you choose?

Read our verdict on the JX1080U and the 900 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH JX1080U and VALMET 900, field by field
Field	JX1080U	900	Gap
Measured performance
PTO power, measured measured	72.1 hp	—	—
Drawbar power, measured measured	57.0 hp	—	—
Engine
Engine power, claimed claimed	—	88.8 hp	—
Engine declared	CNH UK Ltd. F4CE0404C*D681	VALMET 420 DS or DSRE	differs
Displacement declared	4.49 L	4.40 L	—
Maximum torque declared	216 lb·ft · 292.7 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	dry LuK double clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	Constant flow	differs
Pump flow declared	16.4 gpm · 62.2 L/min	14.7 gpm · 55.7 L/min	+12% JX1080U
Pressure declared	2,031 psi · 140 bar	2,901 psi · 200 bar	+43% 900
Three-point lift at ends declared	10,031 lb · 4,550 kg	7,419 lb · 3,365 kg	+35% JX1080U
Rear PTO speeds declared	540E/540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	8,675–8,874 lb · 3,935–4,025 kg	7,408 lb · 3,360 kg	differs
Maximum permissible mass declared	11,905 lb · 5,400 kg	—	—
Wheelbase declared	91.1–92.2 in · 2,314–2,342 mm	88.3 in · 2,244 mm	—
Length declared	154.5 in · 3,925 mm	152.6 in · 3,877 mm	—
Width declared	79.2 in · 2,012 mm	85.7 in · 2,177 mm	+8% 900
Height declared	99.6 in · 2,530 mm	106.3 in · 2,700 mm	+7% 900
Ground clearance declared	14.8–18.0 in · 376–456 mm	19.9 in · 505 mm	differs
Turning radius, braked declared	12.4–13.5 ft · 3.77–4.10 m	15.7 ft · 4.80 m	differs
Fuel tank declared	111.0 qt · 105.0 L	83.5 qt · 79.0 L	+33% JX1080U

Source

Source