Case-IH JX1080U or Renault Ceres 335?

Which should you choose?

On performance, every comparable figure that differs favours the Case-IH JX1080U: hydraulic flow and three-point lift.

  • The Case-IH JX1080U suits loader and hydraulic implement work better on this data: 22% (11.1 L/min / 2.9 gpm) more hydraulic flow and 11% (440 kg / 970 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Case-IH JX1080U and Renault Ceres 335, with the call on each
QuestionJX1080UCeres 335Call
Which puts more power through the PTO shaft?53.8 kW (72.1 hp)OECD Test 228053.5 kW (71.7 hp)OECD Test 1969EvenEven on power at the PTO shaft (both power at the PTO, measured by a laboratory at maximum power): the difference is under the 5% threshold, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the JX1080U and the Ceres 335.
Which pulls harder at the drawbar?42.5 kW (57.0 hp)OECD Test 228045.4 kW (60.9 hp)OECD Test 1969EvenEven on drawbar power (both drawbar power, measured by a laboratory at maximum power): the difference is under the 10% threshold, too small to call.
Which pumps more oil for implements?62.2 L/min (16.4 gpm)Traktorenlexikon, “Case-IH JX1080U”51.1 L/min (13.5 gpm)Traktorenlexikon, “Renault Ceres 335”AheadThe Case-IH JX1080U has 22% more hydraulic flow (11.1 L/min / 2.9 gpm) than the Renault Ceres 335 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?4,550 kg (10,031 lb)Traktorenlexikon, “Case-IH JX1080U”4,110 kg (9,061 lb)Traktorenlexikon, “Renault Ceres 335”AheadThe Case-IH JX1080U has 11% more lift (440 kg / 970 lb) than the Renault Ceres 335 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,935 kg (8,675 lb) to 4,025 kg (8,874 lb), varies by configurationTraktorenlexikon, “Case-IH JX1080U”3,680 kg (8,113 lb) to 3,760 kg (8,289 lb), varies by configurationTraktorenlexikon, “Renault Ceres 335”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?5,400 kg (11,905 lb)Traktorenlexikon, “Case-IH JX1080U”5,860 kg (12,919 lb)Traktorenlexikon, “Renault Ceres 335”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?12OECD test report 2280, 200518OECD test report 1969, 2001Sources disagreeNo call on forward gears: sources disagree on the figure for the Ceres 335.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the JX1080U and the Ceres 335.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Case-IH JX1080U”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault Ceres 335”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540E/540/1000 rpmTraktorenlexikon, “Case-IH JX1080U”540/1000 rpmOECD test report 1978, 2002EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the JX1080U and the Ceres 335.
Which drives on both axles?4WDOECD test report 2280, 2005; Traktorenlexikon, “Case-IH JX1080U”4WDOECD test report 1969, 2001; OECD test report 1978, 2002; Traktorenlexikon, “Renault Ceres 335”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2004–20082000–2004EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Case-IH JX1080U has 22% more hydraulic flow (11.1 L/min / 2.9 gpm) than the Renault Ceres 335 (both pump flow, as stated by the source).
  • The Case-IH JX1080U has 11% more lift (440 kg / 970 lb) than the Renault Ceres 335 (both lift at the hitch ends, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, measured by a laboratory at maximum power): the difference is under the 5% threshold, too small to call.
  • Even on drawbar power (both drawbar power, measured by a laboratory at maximum power): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No call on forward gears: sources disagree on the figure for the Ceres 335.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources