11 material differences · fewer than 12
Tractor oneCase-IH JX1080U2004–200872.1 hpMeasured at the PTO · OECD Test 2280Tractor twoCase-IH JX802004–200870.7 hpMeasured at the PTO · OECD Test 2632
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (40%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
11 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | JX1080U | JX80 | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | 72.1 hp | 70.7 hp | — |
| Drawbar power, measured measured | 57.0 hp | 58.9 hp | — |
| Engine | |||
| Engine declared | CNH UK Ltd. F4CE0404C*D681 | TTF 8035.25E.313T | differs |
| Displacement declared | 4.49 L | 2.93 L | +53% JX1080U |
| Maximum torque declared | 216 lb·ft · 292.7 N·m | 235 lb·ft · 319 N·m | +9% JX80 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Dry LuK double clutch | Pedal-operated dry LuK single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 16.4 gpm · 62.2 L/min | 15.2–16.3 gpm · 57.6–61.8 L/min | differs |
| Pressure declared | 2,031 psi · 140 bar | 1,450–2,103 psi · 100–145 bar | differs |
| Rear PTO speeds declared | 540E/540/1000 rpm | 540E/540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,675–8,874 lb · 3,935–4,025 kg | 6,199–8,322 lb · 2,812–3,775 kg | differs |
| Maximum permissible mass declared | 11,905 lb · 5,400 kg | 11,464 lb · 5,200 kg | — |
| Wheelbase declared | 91.1–92.2 in · 2,314–2,342 mm | 88.5–92.2 in · 2,249–2,342 mm | — |
| Length declared | 154.5 in · 3,925 mm | 152.8–158.7 in · 3,880–4,032 mm | — |
| Width declared | 79.2–105.6 in · 2,012–2,682 mm | 71.2–102.8 in · 1,808–2,610 mm | differs |
| Ground clearance declared | 14.8–18.0 in · 376–456 mm | 11.2–17.7 in · 285–450 mm | differs |
| Turning radius, braked declared | 12.4–13.5 ft · 3.77–4.10 m | 12.1–17.7 ft · 3.70–5.40 m | differs |
| Fuel tank declared | 111.0 qt · 105.0 L | 97.2–121.5 qt · 92.0–115.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH JX1080U sources
- Source: OECD test report 2280, 2005
- Source: Traktorenlexikon, “Case-IH JX1080U”
Case-IH JX80 sources
- Source: OECD test report 2632, 2011
- Source: OECD test report 2633, 2011
- Source: Traktorenlexikon, “Case-IH JX80”
- Source: Traktorenlexikon, “Case-IH JX80U”