Case-IH JX 1075 C or Case-IH JX75?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the JX 1075 C: power at the PTO, claimed (Traktorenlexikon, “Case-IH JX1075C”); the JX75: power at the PTO, measured by a laboratory at maximum power (OECD Test 2628) — not the same quantity, basis and condition.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | JX 1075 C | JX75 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 47.5 kW (63.7 hp)Traktorenlexikon, “Case-IH JX1075C” | 47.1 kW (63.2 hp)OECD Test 2628 | Not comparableNot comparable on power at the PTO shaft: the JX 1075 C: power at the PTO, claimed (Traktorenlexikon, “Case-IH JX1075C”); the JX75: power at the PTO, measured by a laboratory at maximum power (OECD Test 2628) — not the same quantity, basis and condition. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the JX 1075 C and the JX75. |
| Which pulls harder at the drawbar? | — | 38.6 kW (51.8 hp)OECD Test 2628 | No figureNo call on drawbar power: no figure on record for the JX 1075 C. |
| Which pumps more oil for implements? | 63.9 L/min (16.9 gpm)Traktorenlexikon, “Case-IH JX1075C” | 31.8 L/min (8.4 gpm)Traktorenlexikon, “Case-IH JX75” | AheadThe Case-IH JX 1075 C has 101% more hydraulic flow (32.1 L/min / 8.5 gpm) than the Case-IH JX75 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,408 kg (5,309 lb)Traktorenlexikon, “Case-IH JX1075C” | 3,565 kg (7,859 lb)Traktorenlexikon, “Case-IH JX75” | AheadThe Case-IH JX75 has 48% more lift (1,157 kg / 2,551 lb) than the Case-IH JX 1075 C (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,685 kg (5,919 lb)Traktorenlexikon, “Case-IH JX1075C” | 2,726 kg (6,010 lb) to 3,145 kg (6,934 lb), varies by configurationTraktorenlexikon, “Case-IH JX75” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 4,800 kg (10,582 lb)Traktorenlexikon, “Case-IH JX1075C” | — | No figureNo call on maximum permissible mass: no figure on record for the JX75. |
| Which has the wider choice of gears? | 16 to 44Traktorenlexikon, “Case-IH JX1075C” | 12OECD test report 2628, 2011 | AheadThe Case-IH JX 1075 C has 33% more forward gears (4 gears) than the Case-IH JX75 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the JX 1075 C and the JX75. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Case-IH JX1075C” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Case-IH JX75” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540E/540/1000E/1000 rpmTraktorenlexikon, “Case-IH JX1075C” | 540E/540 rpmTraktorenlexikon, “Case-IH JX75” | Sources disagreeNo call on PTO speeds: sources disagree on the PTO speeds of the JX75. |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Case-IH JX1075C” | — | No figureNo call on PTO independence: not stated for the JX75. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Case-IH JX1075C”; OECD test report 2114, 2004; OECD test report 2149, 2004 | 2WD / 4WDOECD test report 2628, 2011; OECD test report 2629, 2011; Traktorenlexikon, “Case-IH JX75” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2003–2008 | 2002–2004 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Case-IH JX 1075 C has 101% more hydraulic flow (32.1 L/min / 8.5 gpm) than the Case-IH JX75 (both pump flow, as stated by the source).
- The Case-IH JX75 has 48% more lift (1,157 kg / 2,551 lb) than the Case-IH JX 1075 C (both lift at the hitch ends, as stated by the source).
- The Case-IH JX 1075 C has 33% more forward gears (4 gears) than the Case-IH JX75 (both forward gears, as stated by the source).
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the JX 1075 C: power at the PTO, claimed (Traktorenlexikon, “Case-IH JX1075C”); the JX75: power at the PTO, measured by a laboratory at maximum power (OECD Test 2628) — not the same quantity, basis and condition.
- No call on PTO speeds: sources disagree on the PTO speeds of the JX75.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources