Case-IH JX 1070 C vs VALMET 6000-4

15 material differences

Tractor one

2003–2008

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the JX 1070 C and the 6000-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH JX 1070 C and VALMET 6000-4, field by field
Field	JX 1070 C	6000-4	Gap
Engine
Engine power, claimed claimed	71 hp	74.0 hp	—
Engine declared	IVECO 8035.25 R	VALMET 420 D	differs
Displacement declared	2.93 L	4.40 L	+50% 6000-4
Maximum torque declared	190 lb·ft · 258 N·m	182 lb·ft · 247 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	dry single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	13.8 gpm · 52.3 L/min	21.2 gpm · 80.3 L/min	+54% 6000-4
Pressure declared	2,466 psi · 170 bar	2,901 psi · 200 bar	+18% 6000-4
Three-point lift at ends declared	5,362 lb · 2,432 kg	9,601 lb · 4,355 kg	+79% 6000-4
Rear PTO speeds declared	540E/540/1000E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,919 lb · 2,685 kg	9,193 lb · 4,170 kg	+55% 6000-4
Maximum permissible mass declared	10,582 lb · 4,800 kg	14,330 lb · 6,500 kg	+35% 6000-4
Wheelbase declared	81.3 in · 2,065 mm	99.6 in · 2,530 mm	+23% 6000-4
Length declared	144.2 in · 3,662 mm	175.2 in · 4,450 mm	+22% 6000-4
Width declared	73.5 in · 1,867 mm	85.2 in · 2,165 mm	+16% 6000-4
Height declared	94.9 in · 2,410 mm	105.9 in · 2,690 mm	+12% 6000-4
Ground clearance declared	13.9 in · 353 mm	16.9 in · 430 mm	+22% 6000-4
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	79.3 qt · 75.0 L	167.0 qt · 158.0 L	+111% 6000-4

Source

Source