10 material differences · fewer than 12

Tractor oneCase-IH JX 1070 C2003–2008No measured PTO figureTractor twoFiat TN 75 D (DT)1999–2004No measured PTO figure

Which should you choose?

Read our verdict on the JX 1070 C and the TN 75 D (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH JX 1070 C and Fiat TN 75 D (DT), field by field
Field	JX 1070 C	TN 75 D (DT)	Gap
Engine
Engine power, claimed claimed	71 hp	71 hp	—
Engine declared	IVECO 8035.25 R	New Holland-Iveco 8035.25	differs
Displacement declared	2.93 L	2.93 L	—
Maximum torque declared	190 lb·ft · 258 N·m	202 lb·ft · 274 N·m	+6% TN 75 D (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Pump flow declared	13.8 gpm · 52.3 L/min	12.5 gpm · 47.4 L/min	+10% JX 1070 C
Pressure declared	2,466 psi · 170 bar	—	—
Rear PTO speeds declared	540E/540/1000E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,919 lb · 2,685 kg	6,746 lb · 3,060 kg	+14% TN 75 D (DT)
Maximum permissible mass declared	10,582 lb · 4,800 kg	9,700 lb · 4,400 kg	+9% JX 1070 C
Wheelbase declared	81.3 in · 2,065 mm	83.9 in · 2,130 mm	—
Length declared	144.2 in · 3,662 mm	156.7 in · 3,980 mm	+9% TN 75 D (DT)
Width declared	73.5 in · 1,867 mm	72.8–92.5 in · 1,850–2,350 mm	differs
Height, over the cab declared	94.9 in · 2,410 mm	94.5 in · 2,400 mm	—
Ground clearance declared	13.9 in · 353 mm	15.0 in · 380 mm	+8% TN 75 D (DT)
Turning radius, braked declared	—	10.5 ft · 3.20 m	—
Fuel tank declared	79.3 qt · 75.0 L	74.0 qt · 70.0 L	+7% JX 1070 C

Source

Source