Case-IH JX 1060 C vs Lamborghini Agile 660 S/DT

11 material differences · fewer than 12

Tractor one

2003–2008

No measured PTO figure

Tractor two

1996–2003

No measured PTO figure

Which should you choose?

Read our verdict on the JX 1060 C and the Agile 660 S/DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH JX 1060 C and Lamborghini Agile 660 S/DT, field by field
Field	JX 1060 C	Agile 660 S/DT	Gap
Engine
Engine power, claimed claimed	54.3 hp	59.1 hp	+9% Agile 660 S/DT
Engine declared	IVECO 8035.05 C (EURO II)	SAME 1000.3 W 1	differs
Displacement declared	2.93 L	3.00 L	—
Maximum torque declared	147 lb·ft · 199 N·m	120 lb·ft · 163 N·m	+22% JX 1060 C
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal operated dry single disc clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	13.8 gpm · 52.1 L/min	9.6 gpm · 36.2 L/min	+44% JX 1060 C
Pressure declared	—	2,176 psi · 150 bar	—
Three-point lift at ends declared	—	5,732 lb · 2,600 kg	—
Rear PTO speeds declared	540E/540/1000E/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,978 lb · 3,165 kg	5,335 lb · 2,420 kg	+31% JX 1060 C
Maximum permissible mass declared	10,582 lb · 4,800 kg	—	—
Wheelbase declared	83.9 in · 2,130 mm	75.8 in · 1,926 mm	+11% JX 1060 C
Length declared	144.2 in · 3,662 mm	116.9 in · 2,970 mm	+23% JX 1060 C
Width declared	73.5 in · 1,867 mm	50.8 in · 1,290 mm	+45% JX 1060 C
Height declared	94.9 in · 2,410 mm	83.1 in · 2,110 mm	+14% JX 1060 C
Ground clearance declared	13.9 in · 353 mm	9.1 in · 230 mm	+53% JX 1060 C
Turning radius, braked declared	—	11.2 ft · 3.40 m	—
Fuel tank declared	74.0 qt · 70.0 L	61.3 qt · 58.0 L	+21% JX 1060 C

Source

Source