Case-IH CX 100 vs New Holland 7635 (A)

11 material differences · fewer than 12

Tractor one

1998–2000

No measured PTO figure

Tractor two

1996–1998

No measured PTO figure

Which should you choose?

Read our verdict on the CX 100 and the 7635 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH CX 100 and New Holland 7635 (A), field by field
Field	CX 100	7635 (A)	Gap
Engine
Engine power, claimed claimed	101 hp	93.7 hp	+7% CX 100
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	Iveco 8045.25 K	differs
Displacement declared	3.99 L	3.91 L	—
Maximum torque declared	268 lb·ft · 364 N·m	209 lb·ft · 284 N·m	+28% CX 100
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry single-disc clutch as driving clutch	—	—
Hydraulics & hitch
Pump flow declared	16.1 gpm · 60.8 L/min	15.9 gpm · 60.0 L/min	—
Pressure declared	2,698 psi · 186 bar	2,103–2,466 psi · 145–170 bar	differs
Three-point lift at ends declared	8,455 lb · 3,835 kg	9,259 lb · 4,200 kg	+10% 7635 (A)
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,337 lb · 4,235 kg	7,496 lb · 3,400 kg	+25% CX 100
Maximum permissible mass declared	13,228 lb · 6,000 kg	13,228 lb · 6,000 kg	—
Wheelbase declared	92.8 in · 2,356 mm	92.2 in · 2,342 mm	—
Length declared	176.0 in · 4,470 mm	157.5 in · 4,000 mm	+12% CX 100
Width declared	83.1 in · 2,110 mm	79.5 in · 2,020 mm	—
Height declared	108.1 in · 2,745 mm	100.4 in · 2,550 mm	+8% CX 100
Ground clearance declared	13.0 in · 330 mm	19.7 in · 500 mm	+52% 7635 (A)
Turning radius, braked declared	19.7 ft · 6.01 m	13.9 ft · 4.25 m	+41% CX 100
Fuel tank declared	163.8 qt · 155.0 L	121.5 qt · 115.0 L	+35% CX 100

Source

Source