Case-IH CX 100 vs Fiat L 95 (DT)

11 material differences · fewer than 12

Tractor one

1998–2000

No measured PTO figure

Tractor two

1996–1998

No measured PTO figure

Which should you choose?

Read our verdict on the CX 100 and the L 95 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH CX 100 and Fiat L 95 (DT), field by field
Field	CX 100	L 95 (DT)	Gap
Engine
Engine power, claimed claimed	101 hp	93.7 hp	+7% CX 100
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	Fiat-Iveco 8045.25 K	differs
Displacement declared	3.99 L	3.91 L	—
Maximum torque declared	268 lb·ft · 364 N·m	209 lb·ft · 284 N·m	+28% CX 100
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry single-disc clutch as driving clutch	—	—
Hydraulics & hitch
Pump flow declared	16.1 gpm · 60.8 L/min	15.9 gpm · 60.0 L/min	—
Pressure declared	2,698 psi · 186 bar	2,103–2,466 psi · 145–170 bar	differs
Three-point lift at ends declared	8,455 lb · 3,835 kg	9,259 lb · 4,200 kg	+10% L 95 (DT)
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,337 lb · 4,235 kg	7,496 lb · 3,400 kg	+25% CX 100
Maximum permissible mass declared	13,228 lb · 6,000 kg	13,228 lb · 6,000 kg	—
Wheelbase declared	92.8 in · 2,356 mm	92.2 in · 2,342 mm	—
Length declared	176.0 in · 4,470 mm	157.5 in · 4,000 mm	+12% CX 100
Width declared	83.1 in · 2,110 mm	79.5 in · 2,020 mm	—
Height declared	108.1 in · 2,745 mm	100.4 in · 2,550 mm	+8% CX 100
Ground clearance declared	13.0 in · 330 mm	19.7 in · 500 mm	+52% L 95 (DT)
Turning radius, braked declared	19.7 ft · 6.01 m	13.9 ft · 4.25 m	+41% CX 100
Fuel tank declared	163.8 qt · 155.0 L	121.5 qt · 115.0 L	+35% CX 100

Source

Source