Case-IH CX 100 vs Fiat 100-90 (DT)

10 material differences · fewer than 12

Tractor one

1998–2000

No measured PTO figure

Tractor two

1984–1992

No measured PTO figure

Which should you choose?

Read our verdict on the CX 100 and the 100-90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Case-IH CX 100 and Fiat 100-90 (DT), field by field
Field	CX 100	100-90 (DT)	Gap
Engine
Engine power, claimed claimed	101 hp	98.7 hp	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	FIAT-IVECO 8065.06.200 or 300	differs
Displacement declared	3.99 L	5.42 L	+36% 100-90 (DT)
Maximum torque declared	268 lb·ft · 364 N·m	226 lb·ft · 306 N·m	+19% CX 100
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry single-disc clutch as driving clutch	—	—
Hydraulics & hitch
Pump flow declared	16.1 gpm · 60.8 L/min	—	—
Pressure declared	2,698 psi · 186 bar	3,046–3,118 psi · 210–215 bar	differs
Three-point lift at ends declared	8,455 lb · 3,835 kg	6,349 lb · 2,880 kg	+33% CX 100
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,337 lb · 4,235 kg	8,962 lb · 4,065 kg	—
Maximum permissible mass declared	13,228 lb · 6,000 kg	13,448 lb · 6,100 kg	—
Wheelbase declared	92.8 in · 2,356 mm	102.1 in · 2,594 mm	+10% 100-90 (DT)
Length declared	176.0 in · 4,470 mm	178.9 in · 4,544 mm	—
Width declared	83.1 in · 2,110 mm	77.6 in · 1,970 mm	+7% CX 100
Height declared	108.1 in · 2,745 mm	103.9 in · 2,640 mm	—
Ground clearance declared	13.0 in · 330 mm	22.0 in · 560 mm	+70% 100-90 (DT)
Turning radius, braked declared	19.7 ft · 6.01 m	12.5 ft · 3.82 m	+57% CX 100
Fuel tank declared	163.8 qt · 155.0 L	98.3 qt · 93.0 L	+67% CX 100

Source

Source