Case-IH CX 60 vs Massey Ferguson MF 4325 (A)

12 material differences

Tractor one

1998–2000

56.5 hp

Measured at the PTO · OECD Test 1894

Tractor two

2001–2003

No measured PTO figure

Which should you choose?

Read our verdict on the CX 60 and the MF 4325 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH CX 60 and Massey Ferguson MF 4325 (A), field by field
Field	CX 60	MF 4325 (A)	Gap
Measured performance
PTO power, measured measured	56.5 hp	—	—
Drawbar power, measured measured	47.6 hp	—	—
Engine
Engine power, claimed claimed	—	66.1 hp	—
Engine declared	Perkins 1942/2250	Perkins 1004.40	differs
Displacement declared	2.70 L	3.99 L	+48% MF 4325 (A)
Maximum torque declared	161 lb·ft · 218.0 N·m	193 lb·ft · 261 N·m	+20% MF 4325 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9 mph · 40 km/h	+33% MF 4325 (A)
Clutch declared	pedal-operated dry single-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	14.0 gpm · 53.0 L/min	—	—
Pressure declared	2,698 psi · 186 bar	2,031 psi · 140 bar	+33% CX 60
Three-point lift at ends declared	4,453 lb · 2,020 kg	6,744 lb · 3,059 kg	+51% MF 4325 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000/540E rpm	differs
Weight & dimensions
Unladen weight declared	6,923 lb · 3,140 kg	6,936 lb · 3,146 kg	—
Maximum permissible mass declared	13,228 lb · 6,000 kg	14,330 lb · 6,500 kg	+8% MF 4325 (A)
Wheelbase declared	84.8 in · 2,154 mm	92.5 in · 2,350 mm	+9% MF 4325 (A)
Length declared	152.0 in · 3,860 mm	151.6 in · 3,850 mm	—
Width declared	82.7 in · 2,100 mm	76.8 in · 1,950 mm	+8% CX 60
Height declared	99.2 in · 2,520 mm	96.5 in · 2,450 mm	—
Ground clearance declared	13.0 in · 330 mm	19.3 in · 490 mm	+48% MF 4325 (A)
Fuel tank declared	163.8 qt · 155.0 L	88.8 qt · 84.0 L	+85% CX 60

Source

Source