Case-IH CX 50 vs Steyr 948 (a)

13 material differences

Tractor one

1998–2000

42.5 hp

Measured at the PTO · OECD Test 1893

Tractor two

1992–1996

No measured PTO figure

Which should you choose?

Read our verdict on the CX 50 and the 948 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 1 fields identical or within 5%, which is not counted as material

Case-IH CX 50 and Steyr 948 (a), field by field
Field	CX 50	948 (a)	Gap
Measured performance
PTO power, measured measured	42.5 hp	—	—
Drawbar power, measured measured	35.4 hp	—	—
Engine
Engine power, claimed claimed	—	47.3 hp	—
Engine declared	Perkins 1962/2250	Steyr WD 308.85	differs
Displacement declared	2.70 L	2.36 L	+15% CX 50
Maximum torque declared	121 lb·ft · 164.0 N·m	108 lb·ft · 147 N·m	+12% CX 50
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	14.0 gpm · 53.0 L/min	—	—
Pressure declared	2,698 psi · 186 bar	—	—
Three-point lift at ends declared	4,451 lb · 2,019 kg	4,012 lb · 1,820 kg	+11% CX 50
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,110 lb · 3,225 kg	5,093 lb · 2,310 kg	+40% CX 50
Maximum permissible mass declared	13,228 lb · 6,000 kg	7,716 lb · 3,500 kg	+71% CX 50
Wheelbase declared	84.8 in · 2,154 mm	77.5 in · 1,968 mm	+9% CX 50
Length declared	150.8 in · 3,830 mm	129.5 in · 3,290 mm	+16% CX 50
Width declared	79.5 in · 2,020 mm	68.5 in · 1,740 mm	+16% CX 50
Height declared	97.2 in · 2,470 mm	90.2 in · 2,290 mm	+8% CX 50
Ground clearance declared	12.4 in · 315 mm	17.5 in · 445 mm	+41% 948 (a)
Turning radius, braked declared	—	10.5 ft · 3.19 m	—
Fuel tank declared	163.8 qt · 155.0 L	56.0 qt · 53.0 L	+192% CX 50

Source

Source