Case-IH CX 50 vs New Holland TN 55 D/S (A)

12 material differences

Tractor one

1998–2000

42.5 hp

Measured at the PTO · OECD Test 1893

Tractor two

1999–2003

No measured PTO figure

Which should you choose?

Read our verdict on the CX 50 and the TN 55 D/S (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH CX 50 and New Holland TN 55 D/S (A), field by field
Field	CX 50	TN 55 D/S (A)	Gap
Measured performance
PTO power, measured measured	42.5 hp	—	—
Drawbar power, measured measured	35.4 hp	—	—
Engine
Engine power, claimed claimed	—	49.3 hp	—
Engine declared	Perkins 1962/2250	IVECO 8035.05 B	differs
Displacement declared	2.70 L	2.93 L	+9% TN 55 D/S (A)
Maximum torque declared	121 lb·ft · 164.0 N·m	136 lb·ft · 185 N·m	+13% TN 55 D/S (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	14.0 gpm · 53.0 L/min	12.5 gpm · 47.4 L/min	+12% CX 50
Pressure declared	2,698 psi · 186 bar	2,466 psi · 170 bar	+9% CX 50
Three-point lift at ends declared	4,451 lb · 2,019 kg	5,886 lb · 2,670 kg	+32% TN 55 D/S (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,110 lb · 3,225 kg	6,636 lb · 3,010 kg	+7% CX 50
Maximum permissible mass declared	13,228 lb · 6,000 kg	8,818 lb · 4,000 kg	+50% CX 50
Wheelbase declared	84.8 in · 2,154 mm	83.9 in · 2,130 mm	—
Length declared	150.8 in · 3,830 mm	156.7 in · 3,980 mm	—
Width declared	79.5 in · 2,020 mm	70.6 in · 1,794 mm	+13% CX 50
Height declared	97.2 in · 2,470 mm	90.9 in · 2,310 mm	+7% CX 50
Ground clearance declared	12.4 in · 315 mm	13.0 in · 330 mm	—
Turning radius, braked declared	—	10.3 ft · 3.15 m	—
Fuel tank declared	163.8 qt · 155.0 L	78.0 qt · 73.8 L	+110% CX 50

Source

Source