Case-IH CS-94 vs Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A)

8 material differences · fewer than 12

Tractor one

1995–2003

No measured PTO figure

Tractor two

1987–2000

No measured PTO figure

Which should you choose?

Read our verdict on the CS-94 and the R-9880 (DT) TL-45 N/A (TL-45 DT/A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH CS-94 and Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A), field by field
Field	CS-94	R-9880 (DT) TL-45 N/A (TL-45 DT/A)	Gap
Engine
Engine power, claimed claimed	92.7 hp	91.7 hp	—
Engine declared	MWM WD 401.85	Perkins TL 4.236	differs
Displacement declared	—	3.86 L	—
Maximum torque declared	—	255 lb·ft · 346 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry double clutch, pedal-operated drive clutch, hand lever-operated PTO clutch	—	—
Hydraulics & hitch
Pump flow declared	14.1 gpm · 53.3 L/min	11.5 gpm · 43.7 L/min	+22% CS-94
Three-point lift at ends declared	—	7,893 lb · 3,580 kg	—
Rear PTO speeds declared	390/540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,609 lb · 3,905 kg	7,893 lb · 3,580 kg	+9% CS-94
Maximum permissible mass declared	14,330 lb · 6,500 kg	—	—
Wheelbase declared	97.5 in · 2,477 mm	97.0 in · 2,463 mm	—
Length declared	165.7 in · 4,210 mm	155.5 in · 3,950 mm	+7% CS-94
Width declared	86.6 in · 2,200 mm	80.3 in · 2,040 mm	+8% CS-94
Height declared	100.4 in · 2,550 mm	107.3 in · 2,725 mm	+7% R-9880 (DT) TL-45 N/A (TL-45 DT/A)
Ground clearance declared	17.7 in · 450 mm	18.1 in · 460 mm	—
Turning radius, braked declared	15.7 ft · 4.80 m	12.8 ft · 3.89 m	+23% CS-94
Fuel tank declared	105.7 qt · 100.0 L	107.8 qt · 102.0 L	—

Source

Source