Case-IH CS-86 (A) vs New Holland TS 90 (A)

8 material differences · fewer than 12

Tractor one

1995–2003

No measured PTO figure

Tractor two

1997–2003

No measured PTO figure

Which should you choose?

Read our verdict on the CS-86 (A) and the TS 90 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH CS-86 (A) and New Holland TS 90 (A), field by field
Field	CS-86 (A)	TS 90 (A)	Gap
Engine
Engine power, claimed claimed	84.9 hp	79.0 hp	+7% CS-86 (A)
Engine declared	MWM WD 401.83	New Holland 450/NE	differs
Displacement declared	—	4.99 L	—
Maximum torque declared	—	240 lb·ft · 325 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry FICHTEL & SACHS double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	14.1 gpm · 53.3 L/min	19.2 gpm · 72.7 L/min	+36% TS 90 (A)
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	10,031 lb · 4,550 kg	9,467 lb · 4,294 kg	+6% CS-86 (A)
Rear PTO speeds declared	390/540/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,782 lb · 3,530 kg	8,662 lb · 3,929 kg	+11% TS 90 (A)
Maximum permissible mass declared	14,330 lb · 6,500 kg	13,228 lb · 6,000 kg	+8% CS-86 (A)
Wheelbase declared	95.3 in · 2,420 mm	91.7 in · 2,330 mm	—
Length declared	158.5 in · 4,025 mm	150.0 in · 3,810 mm	+6% CS-86 (A)
Width declared	81.2 in · 2,063 mm	82.4 in · 2,092 mm	—
Height declared	104.7 in · 2,660 mm	107.3 in · 2,726 mm	—
Ground clearance declared	—	15.4 in · 390 mm	—
Turning radius, braked declared	—	10.8 ft · 3.30 m	—
Fuel tank declared	105.7 qt · 100.0 L	169.1 qt · 160.0 L	+60% TS 90 (A)

Source

Source