6 material differences · fewer than 12
Tractor oneCase-IH CS-86 (A)1995–2003No measured PTO figureTractor twoNew Holland T 50402008–2012No measured PTO figure
Which should you choose?
Read our verdict on the CS-86 (A) and the T 5040 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | CS-86 (A) | T 5040 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 84.9 hp | 84.9 hp | — |
| Engine declared | MWM WD 401.83 | IVECO-NEF F4CE 9484 N | differs |
| Displacement declared | — | 4.49 L | — |
| Maximum torque declared | — | 254 lb·ft · 345 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Dry FICHTEL & SACHS double clutch | Electrohydraulically actuated wet multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 14.1 gpm · 53.3 L/min | 17.4 gpm · 66.0 L/min | +24% T 5040 |
| Pressure declared | 3,481 psi · 240 bar | 3,336 psi · 230 bar | — |
| Rear PTO speeds declared | 390/540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,782 lb · 3,530 kg | 8,389 lb · 3,805 kg | +8% T 5040 |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | 13,669 lb · 6,200 kg | — |
| Wheelbase declared | 95.3 in · 2,420 mm | 92.2 in · 2,342 mm | — |
| Length declared | 158.5 in · 4,025 mm | 158.7 in · 4,030 mm | — |
| Width declared | 81.2 in · 2,063 mm | 78.9 in · 2,005 mm | — |
| Height, over the cab declared | 104.7 in · 2,660 mm | 100.2 in · 2,546 mm | — |
| Fuel tank declared | 105.7 qt · 100.0 L | 134.2 qt · 127.0 L | +27% T 5040 |
Case-IH CS-86 (A) sources
Source
- Source: Traktorenlexikon, “Case-IH CS86”
New Holland T 5040 sources
Source
- Source: Traktorenlexikon, “New Holland T5040”