5 material differences · fewer than 12

Tractor oneCase-IH CS-86 (A)1995–2003No measured PTO figureTractor twoCase-Steyr M 9086 a1995–2003No measured PTO figure

Which should you choose?

Read our verdict on the CS-86 (A) and the M 9086 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

5 material differences · 8 fields identical or within 5%, which is not counted as material

Case-IH CS-86 (A) and Case-Steyr M 9086 a, field by field
Field	CS-86 (A)	M 9086 a	Gap
Engine
Engine power, claimed claimed	84.9 hp	84.9 hp	—
Engine declared	MWM WD 401.83	Steyr-MWM WD 401.83	differs
Displacement declared	—	4.16 L	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry FICHTEL & SACHS double clutch	Dry double clutch with pedal-operated driving clutch and hand lever-operated PTO clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	14.1 gpm · 53.3 L/min	12.7 gpm · 48.1 L/min	+11% CS-86 (A)
Pressure declared	3,481 psi · 240 bar	—	—
Rear PTO speeds declared	390/540/1000 rpm	430/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,782 lb · 3,530 kg	8,708 lb · 3,950 kg	+12% M 9086 a
Maximum permissible mass declared	14,330 lb · 6,500 kg	14,330 lb · 6,500 kg	—
Wheelbase declared	95.3 in · 2,420 mm	97.7 in · 2,481 mm	—
Length declared	158.5 in · 4,025 mm	165.9 in · 4,215 mm	—
Width declared	81.2 in · 2,063 mm	85.4 in · 2,170 mm	—
Height, over the cab declared	104.7 in · 2,660 mm	100.4 in · 2,550 mm	—
Ground clearance declared	—	16.9 in · 430 mm	—
Turning radius, braked declared	—	14.1 ft · 4.30 m	—
Fuel tank declared	105.7 qt · 100.0 L	105.7 qt · 100.0 L	—

Source

Source