Case-IH CS-78 (A) vs ZETOR 7321/7341 Super

8 material differences · fewer than 12

Tractor one

1995–2003

No measured PTO figure

Tractor two

1997–2004

No measured PTO figure

Which should you choose?

Read our verdict on the CS-78 (A) and the 7321/7341 Super → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH CS-78 (A) and ZETOR 7321/7341 Super, field by field
Field	CS-78 (A)	7321/7341 Super	Gap
Engine
Engine power, claimed claimed	77.0 hp	75.9 hp	—
Engine declared	MWM WD 401.81	ZETOR Z-7302	differs
Displacement declared	—	3.92 L	—
Maximum torque declared	—	221 lb·ft · 300 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry Fichtel & Sachs double clutch	Pedal operated driving clutch with 310 mm disc diameter	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Constant flow	—
Pump flow declared	13.3 gpm · 50.5 L/min	14.2 gpm · 53.8 L/min	+7% 7321/7341 Super
Pressure declared	—	1,740 psi · 120 bar	—
Three-point lift at ends declared	—	6,903 lb · 3,131 kg	—
Rear PTO speeds declared	390/540/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,430 lb · 3,370 kg	7,264 lb · 3,295 kg	—
Maximum permissible mass declared	14,330 lb · 6,500 kg	11,905 lb · 5,400 kg	+20% CS-78 (A)
Wheelbase declared	95.3 in · 2,420 mm	88.9 in · 2,257 mm	+7% CS-78 (A)
Length declared	158.5 in · 4,025 mm	132.7 in · 3,370 mm	+19% CS-78 (A)
Width declared	73.7 in · 1,873 mm	75.8 in · 1,925 mm	—
Height declared	104.7 in · 2,660 mm	103.9 in · 2,640 mm	—
Ground clearance declared	—	17.5 in · 444 mm	—
Turning radius, braked declared	—	11.0 ft · 3.35 m	—
Fuel tank declared	105.7 qt · 100.0 L	126.8 qt · 120.0 L	+20% 7321/7341 Super

Source

Source