1 material differences · fewer than 12
Tractor oneCase-IH CS-78 (A)1995–2003No measured PTO figureTractor twoSteyr 9078 (a)1993–1995No measured PTO figure
Which should you choose?
Read our verdict on the CS-78 (A) and the 9078 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
1 material differences · 13 fields identical or within 5%, which is not counted as material
| Field | CS-78 (A) | 9078 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 77.0 hp | 77.0 hp | — |
| Engine declared | MWM WD 401.81 | Steyr-MWM WD 401.81 | differs |
| Displacement declared | — | 4.16 L | — |
| Maximum torque declared | — | 215 lb·ft · 292 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Dry Fichtel & Sachs double clutch | Dry Fichtel & Sachs double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Pump flow declared | 13.3 gpm · 50.5 L/min | 13.3 gpm · 50.5 L/min | — |
| Pressure declared | — | 2,147 psi · 148 bar | — |
| Rear PTO speeds declared | 390/540/1000 rpm | 390/540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,430 lb · 3,370 kg | 7,430 lb · 3,370 kg | — |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | 14,330 lb · 6,500 kg | — |
| Wheelbase declared | 95.3 in · 2,420 mm | 95.3 in · 2,420 mm | — |
| Length declared | 158.5 in · 4,025 mm | 158.5 in · 4,025 mm | — |
| Width declared | 73.7 in · 1,873 mm | 73.7 in · 1,873 mm | — |
| Height, over the cab declared | 104.7 in · 2,660 mm | 104.7 in · 2,660 mm | — |
| Fuel tank declared | 105.7 qt · 100.0 L | 105.7 qt · 100.0 L | — |
Case-IH CS-78 (A) sources
Source
- Source: Traktorenlexikon, “Case-IH CS78”
Steyr 9078 (a) sources
Source
- Source: Traktorenlexikon, “Steyr 9078”