Case-IH CS-78 (A) vs Renault 85-32 MX
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the CS-78 (A) and the 85-32 MX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | CS-78 (A) | 85-32 MX | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 77.0 hp | 77.0 hp | — |
| Engine declared | MWM WD 401.81 | MWM D 226-4 | differs |
| Displacement declared | — | 4.15 L | — |
| Maximum torque declared | — | 190 lb·ft · 258 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Dry Fichtel & Sachs double clutch | Dry LuK double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 13.3 gpm · 50.5 L/min | 10.9 gpm · 41.4 L/min | +22% CS-78 (A) |
| Three-point lift at ends declared | — | 8,433 lb · 3,825 kg | — |
| Rear PTO speeds declared | 390/540/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,430 lb · 3,370 kg | 7,540 lb · 3,420 kg | — |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | — | — |
| Wheelbase declared | 95.3 in · 2,420 mm | 95.7 in · 2,430 mm | — |
| Length declared | 158.5 in · 4,025 mm | 154.7 in · 3,930 mm | — |
| Width declared | 73.7 in · 1,873 mm | 75.9 in · 1,929 mm | — |
| Height declared | 104.7 in · 2,660 mm | 99.2 in · 2,520 mm | +6% CS-78 (A) |
| Ground clearance declared | — | 19.3 in · 490 mm | — |
| Turning radius, braked declared | — | 13.3 ft · 4.05 m | — |
| Fuel tank declared | 105.7 qt · 100.0 L | 121.5 qt · 115.0 L | +15% 85-32 MX |
Case-IH CS-78 (A) sources
Source
- Source: Traktorenlexikon, “Case-IH CS78”
Renault 85-32 MX sources
Source
- Source: Traktorenlexikon, “Renault 85-32 ME/MA/MS/MX R3161”
- Source: Traktorenlexikon, “Fendt Farmer 108 S/SA”