6 material differences · fewer than 12

Tractor oneCase-IH CS-78 (A)1995–2003No measured PTO figureTractor twoRenault 85-12 TX1986–1989No measured PTO figure

Which should you choose?

Read our verdict on the CS-78 (A) and the 85-12 TX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH CS-78 (A) and Renault 85-12 TX, field by field
Field	CS-78 (A)	85-12 TX	Gap
Engine
Engine power, claimed claimed	77.0 hp	77.0 hp	—
Engine declared	MWM WD 401.81	MWM D 226-4	differs
Displacement declared	—	4.15 L	—
Maximum torque declared	—	181 lb·ft · 245 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry Fichtel & Sachs double clutch	Dry LuK double clutch type 310/310 G	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	13.3 gpm · 50.5 L/min	10.9 gpm · 41.4 L/min	+22% CS-78 (A)
Pressure declared	—	1,595 psi · 110 bar	—
Rear PTO speeds declared	390/540/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,430 lb · 3,370 kg	7,507 lb · 3,405 kg	—
Maximum permissible mass declared	14,330 lb · 6,500 kg	—	—
Wheelbase declared	95.3 in · 2,420 mm	95.6 in · 2,428 mm	—
Length declared	158.5 in · 4,025 mm	154.9 in · 3,934 mm	—
Width declared	73.7 in · 1,873 mm	78.0–87.8 in · 1,980–2,229 mm	differs
Height, over the cab declared	104.7 in · 2,660 mm	109.3 in · 2,775 mm	—
Ground clearance declared	—	14.8 in · 377 mm	—
Turning radius, braked declared	—	12.8 ft · 3.90 m	—
Fuel tank declared	105.7 qt · 100.0 L	108.8 qt · 103.0 L	—

Source

Source