9 material differences · fewer than 12

Tractor oneCase-IH CS-78 (A)1995–2003No measured PTO figureTractor twoNew Holland T-40302008–2012No measured PTO figure

Which should you choose?

Read our verdict on the CS-78 (A) and the T-4030 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH CS-78 (A) and New Holland T-4030, field by field
Field	CS-78 (A)	T-4030	Gap
Engine
Engine power, claimed claimed	77.0 hp	77.0 hp	—
Engine declared	MWM WD 401.81	IVECO F5 AE 9484 B (Tier-III)	differs
Displacement declared	—	3.20 L	—
Maximum torque declared	—	229 lb·ft · 311 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry Fichtel & Sachs double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	13.3 gpm · 50.5 L/min	13.7 gpm · 52.0 L/min	—
Rear PTO speeds declared	390/540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,430 lb · 3,370 kg	6,779 lb · 3,075 kg	+10% CS-78 (A)
Maximum permissible mass declared	14,330 lb · 6,500 kg	11,574 lb · 5,250 kg	+24% CS-78 (A)
Wheelbase declared	95.3 in · 2,420 mm	82.6 in · 2,098 mm	+15% CS-78 (A)
Length declared	158.5 in · 4,025 mm	143.2 in · 3,637 mm	+11% CS-78 (A)
Width declared	73.7 in · 1,873 mm	73.5–95.6 in · 1,867–2,428 mm	differs
Height, over the cab declared	104.7 in · 2,660 mm	92.1 in · 2,340 mm	+14% CS-78 (A)
Ground clearance declared	—	15.0 in · 380 mm	—
Turning radius, braked declared	—	11.1 ft · 3.37 m	—
Fuel tank declared	105.7 qt · 100.0 L	79.3 qt · 75.0 L	+33% CS-78 (A)

Source

Source