Case-IH CS-75 A vs Massey Ferguson MF 4235 (A)

9 material differences · fewer than 12

Tractor one

1994–2001

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the CS-75 A and the MF 4235 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH CS-75 A and Massey Ferguson MF 4235 (A), field by field
Field	CS-75 A	MF 4235 (A)	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	MWM 301.88 T	Perkins 4.41	differs
Displacement declared	—	4.08 L	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry double clutch	Pedal operated, dry and air cooled single disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	10.9 gpm · 41.4 L/min	—	—
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	—	6,856 lb · 3,110 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,834 lb · 3,100 kg	7,915 lb · 3,590 kg	+16% MF 4235 (A)
Maximum permissible mass declared	9,921 lb · 4,500 kg	15,432 lb · 7,000 kg	+56% MF 4235 (A)
Wheelbase declared	87.8 in · 2,229 mm	92.5 in · 2,350 mm	+5% MF 4235 (A)
Length declared	149.3 in · 3,792 mm	157.9 in · 4,010 mm	+6% MF 4235 (A)
Width declared	74.8 in · 1,900 mm	78.3 in · 1,990 mm	—
Height declared	99.0 in · 2,515 mm	103.7 in · 2,635 mm	—
Ground clearance declared	15.7 in · 400 mm	11.4 in · 290 mm	+38% CS-75 A
Fuel tank declared	87.7 qt · 83.0 L	196.5 qt · 186.0 L	+124% MF 4235 (A)

Source

Source