Case-IH CS-75 A vs Deutz-Fahr Agrotron 80

11 material differences · fewer than 12

Tractor one

1994–2001

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the CS-75 A and the Agrotron 80 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH CS-75 A and Deutz-Fahr Agrotron 80, field by field
Field	CS-75 A	Agrotron 80	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	MWM 301.88 T	Deutz BF 4 M 1012 E	differs
Displacement declared	—	3.19 L	—
Maximum torque declared	—	205 lb·ft · 279 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	10.9 gpm · 41.4 L/min	17.4 gpm · 66.0 L/min	+59% Agrotron 80
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	—	13,713 lb · 6,220 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,834 lb · 3,100 kg	8,752 lb · 3,970 kg	+28% Agrotron 80
Maximum permissible mass declared	9,921 lb · 4,500 kg	14,330 lb · 6,500 kg	+44% Agrotron 80
Wheelbase declared	87.8 in · 2,229 mm	95.2 in · 2,419 mm	+9% Agrotron 80
Length declared	149.3 in · 3,792 mm	157.7 in · 4,005 mm	+6% Agrotron 80
Width declared	74.8 in · 1,900 mm	81.1 in · 2,060 mm	+8% Agrotron 80
Height declared	99.0 in · 2,515 mm	107.1 in · 2,720 mm	+8% Agrotron 80
Ground clearance declared	15.7 in · 400 mm	18.7 in · 475 mm	+19% Agrotron 80
Fuel tank declared	87.7 qt · 83.0 L	200.8 qt · 190 L	+129% Agrotron 80

Source

Source