1 material differences · fewer than 12
Tractor oneCase-IH CS-58 (A)1996–2001No measured PTO figureTractor twoCase-Steyr M 958 (a)1996–2001No measured PTO figure
Which should you choose?
Read our verdict on the CS-58 (A) and the M 958 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
1 material differences · 16 fields identical or within 5%, which is not counted as material
| Field | CS-58 (A) | M 958 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.3 hp | 57.3 hp | — |
| Engine declared | PERKINS 903-27 T | PERKINS 903-27 T | — |
| Displacement declared | 2.70 L | 2.70 L | — |
| Maximum torque declared | 155 lb·ft · 210 N·m | 136 lb·ft · 184 N·m | +14% CS-58 (A) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Dry Carraro double clutch | dry Carraro double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.1 gpm · 30.8 L/min | 8.1 gpm · 30.8 L/min | — |
| Pressure declared | 3,481 psi · 240 bar | 3,481 psi · 240 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,203 lb · 2,360 kg | 5,203 lb · 2,360 kg | — |
| Maximum permissible mass declared | 9,259 lb · 4,200 kg | 9,259 lb · 4,200 kg | — |
| Wheelbase declared | 83.3 in · 2,117 mm | 83.3 in · 2,117 mm | — |
| Length declared | 139.0 in · 3,530 mm | 139.0 in · 3,530 mm | — |
| Width declared | 74.4 in · 1,890 mm | 74.4 in · 1,890 mm | — |
| Height, over the cab declared | 87.8 in · 2,230 mm | 87.8 in · 2,230 mm | — |
| Ground clearance declared | 16.1 in · 410 mm | 16.1 in · 410 mm | — |
| Fuel tank declared | 77.1 qt · 73.0 L | 77.1 qt · 73.0 L | — |
Case-IH CS-58 (A) sources
Source
- Source: Traktorenlexikon, “Case-IH CS58/a”
- Source: Traktorenlexikon, “Case-IH CS52/a”
Case-Steyr M 958 (a) sources
Source
- Source: Traktorenlexikon, “Steyr M 958”
- Source: Traktorenlexikon, “Case-IH CS52/a”