Case-IH CS-52 vs Hürlimann XE 55 Tradition

13 material differences

Tractor one

1998–2001

No measured PTO figure

Tractor two

2005–2009

No measured PTO figure

Which should you choose?

Read our verdict on the CS-52 and the XE 55 Tradition → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH CS-52 and Hürlimann XE 55 Tradition, field by field
Field	CS-52	XE 55 Tradition	Gap
Engine
Engine power, claimed claimed	51.2 hp	51.2 hp	—
Engine declared	PERKINS 903-27 T	SAME-DEUTZ-FAHR 1000.3 W (EURO-II)	differs
Displacement declared	2.70 L	3.00 L	+11% XE 55 Tradition
Maximum torque declared	142 lb·ft · 193 N·m	151 lb·ft · 205 N·m	+6% XE 55 Tradition
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	dry double clutch, pedal-operated driving clutch	Pedal operated dry single disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pressure declared	3,481 psi · 240 bar	3,046 psi · 210 bar	+14% CS-52
Three-point lift at ends declared	5,556 lb · 2,520 kg	6,614 lb · 3,000 kg	+19% XE 55 Tradition
Rear PTO speeds declared	540/1000 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	5,467 lb · 2,480 kg	4,806 lb · 2,180 kg	+14% CS-52
Wheelbase declared	83.5 in · 2,121 mm	75.8 in · 1,925 mm	+10% CS-52
Length declared	140.6 in · 3,570 mm	121.5 in · 3,085 mm	+16% CS-52
Width declared	74.8 in · 1,900 mm	64.6 in · 1,640 mm	+16% CS-52
Height declared	92.9 in · 2,360 mm	88.4 in · 2,245 mm	—
Ground clearance declared	—	13.2 in · 335 mm	—
Fuel tank declared	77.1 qt · 73.0 L	52.8 qt · 50.0 L	+46% CS-52

Source

Source