Case-IH CS-52 vs Deutz-Fahr Agrolux 57

11 material differences · fewer than 12

Tractor one

1998–2001

No measured PTO figure

Tractor two

2006–2008

No measured PTO figure

Which should you choose?

Read our verdict on the CS-52 and the Agrolux 57 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH CS-52 and Deutz-Fahr Agrolux 57, field by field
Field	CS-52	Agrolux 57	Gap
Engine
Engine power, claimed claimed	51.2 hp	51.4 hp	—
Engine declared	PERKINS 903-27 T	Same 1000.3 W	differs
Displacement declared	2.70 L	3.00 L	+11% Agrolux 57
Maximum torque declared	142 lb·ft · 193 N·m	151 lb·ft · 205 N·m	+6% Agrolux 57
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	dry double clutch, pedal-operated driving clutch	Pedal-operated dry Borg & Beck single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	—	9.5 gpm · 36.0 L/min	—
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	5,556 lb · 2,520 kg	6,614 lb · 3,000 kg	+19% Agrolux 57
Rear PTO speeds declared	540/1000 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	5,467 lb · 2,480 kg	4,894 lb · 2,220 kg	+12% CS-52
Maximum permissible mass declared	—	9,480 lb · 4,300 kg	—
Wheelbase declared	83.5 in · 2,121 mm	75.8 in · 1,925 mm	+10% CS-52
Length declared	140.6 in · 3,570 mm	134.8 in · 3,425 mm	—
Width declared	74.8 in · 1,900 mm	52.8–80.3 in · 1,340–2,040 mm	differs
Height declared	92.9 in · 2,360 mm	90.2 in · 2,290 mm	—
Ground clearance declared	—	15.0 in · 380 mm	—
Fuel tank declared	77.1 qt · 73.0 L	56.0 qt · 53 L	+38% CS-52

Source

Source