Case-IH CS-52 vs DEUTZ-ALLIS 6250
7 material differences · fewer than 12
Which should you choose?
Read our verdict on the CS-52 and the 6250 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | CS-52 | 6250 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 51.2 hp | 50.3 hp | — |
| Engine declared | PERKINS 903-27 T | KHD F3L 912 | differs |
| Displacement declared | 2.70 L | 2.83 L | — |
| Maximum torque declared | 142 lb·ft · 193 N·m | 122 lb·ft · 166 N·m | +16% CS-52 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | dry double clutch, pedal-operated driving clutch | Independent dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 11.6 gpm · 43.9 L/min | — |
| Pressure declared | 3,481 psi · 240 bar | — | — |
| Three-point lift at ends declared | 5,556 lb · 2,520 kg | 5,291 lb · 2,400 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,467 lb · 2,480 kg | 6,019 lb · 2,730 kg | +10% 6250 |
| Maximum permissible mass declared | — | 11,023 lb · 5,000 kg | — |
| Wheelbase declared | 83.5 in · 2,121 mm | 79.2 in · 2,012 mm | +5% CS-52 |
| Length declared | 140.6 in · 3,570 mm | 137.4 in · 3,490 mm | — |
| Width declared | 74.8 in · 1,900 mm | 82.3 in · 2,090 mm | +10% 6250 |
| Height declared | 92.9 in · 2,360 mm | 91.3 in · 2,320 mm | — |
| Ground clearance declared | — | 16.1 in · 410 mm | — |
| Fuel tank declared | 77.1 qt · 73.0 L | 79.3 qt · 75.0 L | — |
Case-IH CS-52 sources
Source
- Source: Traktorenlexikon, “Case-IH CS52/a”
DEUTZ-ALLIS 6250 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 6250”
- Source: Traktorenlexikon, “Deutz D 4006 P”