9 material differences · fewer than 12

Tractor oneCase-IH CS 1501997–2003No measured PTO figureTractor twoNew Holland TM 140 (Traktorenlexikon)2002–2007No measured PTO figure

Which should you choose?

Read our verdict on the CS 150 and the TM 140 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 8 fields identical or within 5%, which is not counted as material

Case-IH CS 150 and New Holland TM 140 (Traktorenlexikon), field by field
Field	CS 150	TM 140	Gap
Engine
Engine power, claimed claimed	143.0 hp	142.0 hp	—
Engine declared	SISU 620.83	NEW HOLLAND 675-TA/HB	differs
Displacement declared	6.60 L	7.48 L	+13% TM 140
Maximum torque declared	410 lb·ft · 556 N·m	420 lb·ft · 569 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Transmission integrated, wet CASE-IH multi-disc clutch, designed as drive clutch	—	—
Hydraulics & hitch
Pump flow declared	32.7 gpm · 123.8 L/min	31.7 gpm · 119.9 L/min	—
Pressure declared	3,408 psi · 235 bar	3,336 psi · 230 bar	—
Three-point lift, at the coupling points declared	19,467 lb · 8,830 kg	17,271 lb · 7,834 kg	+13% CS 150
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,250 lb · 6,010 kg	14,220 lb · 6,450 kg	+7% TM 140
Maximum permissible mass declared	20,944 lb · 9,500 kg	19,842 lb · 9,000 kg	+6% CS 150
Wheelbase declared	110.5 in · 2,806 mm	107.2 in · 2,723 mm	—
Length declared	194.1 in · 4,930 mm	227.9 in · 5,789 mm	+17% TM 140
Width declared	99.0 in · 2,515 mm	97.8 in · 2,485 mm	—
Height, over the cab declared	114.6 in · 2,910 mm	117.3 in · 2,980 mm	—
Ground clearance declared	21.3 in · 540 mm	15.4 in · 390 mm	+38% CS 150
Turning radius, braked declared	—	18.1 ft · 5.52 m	—
Fuel tank declared	232.5–317.0 qt · 220.0–300.0 L	301.2 qt · 285.0 L	differs

Source

Source