Case-IH CS 150 vs Massey Ferguson MF 8210 A

12 material differences

Tractor one

1997–2003

No measured PTO figure

Tractor two

1999–2003

No measured PTO figure

Which should you choose?

Read our verdict on the CS 150 and the MF 8210 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH CS 150 and Massey Ferguson MF 8210 A, field by field
Field	CS 150	MF 8210 A	Gap
Engine
Engine power, claimed claimed	143.0 hp	143.1 hp	—
Engine declared	SISU 620.83	Perkins 1006.60 TW	differs
Displacement declared	6.60 L	5.99 L	+10% CS 150
Maximum torque declared	410 lb·ft · 556 N·m	437 lb·ft · 593 N·m	+7% MF 8210 A
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Transmission integrated, wet CASE-IH multi-disc clutch, designed as drive clutch	Pedal operated, hydraulic VALEO multi-plate clutch	differs
Hydraulics & hitch
Pump flow declared	32.7 gpm · 123.8 L/min	30.9 gpm · 116.8 L/min	+6% CS 150
Pressure declared	3,408 psi · 235 bar	3,336 psi · 230 bar	—
Three-point lift at ends declared	19,467 lb · 8,830 kg	19,334 lb · 8,770 kg	—
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,250 lb · 6,010 kg	14,573 lb · 6,610 kg	+10% MF 8210 A
Maximum permissible mass declared	20,944 lb · 9,500 kg	26,455 lb · 12,000 kg	+26% MF 8210 A
Wheelbase declared	110.5 in · 2,806 mm	111.7 in · 2,838 mm	—
Length declared	194.1 in · 4,930 mm	198.8 in · 5,050 mm	—
Width declared	99.0 in · 2,515 mm	84.2 in · 2,138 mm	+18% CS 150
Height declared	114.6 in · 2,910 mm	126.0 in · 3,200 mm	+10% MF 8210 A
Ground clearance declared	21.3 in · 540 mm	19.4 in · 493 mm	+10% CS 150
Fuel tank declared	232.5–317.0 qt · 220.0–300.0 L	433.2 qt · 410.0 L	differs

Source

Source