Case-IH CS 150 vs Massey Ferguson MF 8120 A

12 material differences

Tractor one

1997–2003

No measured PTO figure

Tractor two

1995–1999

No measured PTO figure

Which should you choose?

Read our verdict on the CS 150 and the MF 8120 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH CS 150 and Massey Ferguson MF 8120 A, field by field
Field	CS 150	MF 8120 A	Gap
Engine
Engine power, claimed claimed	143.0 hp	143.1 hp	—
Engine declared	SISU 620.83	Perkins 1006.60 THR 3	differs
Displacement declared	6.60 L	5.99 L	+10% CS 150
Maximum torque declared	410 lb·ft · 556 N·m	406 lb·ft · 550 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Transmission integrated, wet CASE-IH multi-disc clutch, designed as drive clutch	Pedal-operated dry Valeo double clutch	differs
Hydraulics & hitch
Pump flow declared	32.7 gpm · 123.8 L/min	14.1 gpm · 53.3 L/min	+132% CS 150
Pressure declared	3,408 psi · 235 bar	2,901 psi · 200 bar	+18% CS 150
Three-point lift at ends declared	19,467 lb · 8,830 kg	12,434 lb · 5,640 kg	+57% CS 150
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,250 lb · 6,010 kg	12,434 lb · 5,640 kg	+7% CS 150
Maximum permissible mass declared	20,944 lb · 9,500 kg	25,353 lb · 11,500 kg	+21% MF 8120 A
Wheelbase declared	110.5 in · 2,806 mm	109.3 in · 2,777 mm	—
Length declared	194.1 in · 4,930 mm	199.7 in · 5,073 mm	—
Width declared	99.0 in · 2,515 mm	90.8 in · 2,306 mm	+9% CS 150
Height declared	114.6 in · 2,910 mm	115.8 in · 2,941 mm	—
Ground clearance declared	21.3 in · 540 mm	17.4 in · 442 mm	+22% CS 150
Fuel tank declared	232.5–317.0 qt · 220.0–300.0 L	238.8 qt · 226.0 L	differs

Source

Source