Case-IH Magnum 280 vs John Deere 8410
7 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (39%); they were not built in overlapping years (2005–2011; 1999–2002). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
7 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Magnum 280 | 8410 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 275 hp | 266.5 hp | — |
| Engine declared | — | John Deere-PowerTech 6.081 HRW-17 | — |
| Displacement declared | — | 8.13 L | — |
| Maximum torque declared | 949 lb·ft · 1,287 N·m | 829 lb·ft · 1,124 N·m | +15% Magnum 280 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Pedal operated hydraulic wet John Deere multi-plate clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | Closed centre | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 43.9 gpm · 166 L/min | 31.8 gpm · 120.4 L/min | +38% Magnum 280 |
| Pressure declared | 3,046 psi · 210 bar | 3,379 psi · 233 bar | +11% 8410 |
| Three-point lift at ends declared | — | 11,645 lb · 5,282 kg | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 28,440 lb · 12,900 kg | 20,439 lb · 9,271 kg | +39% Magnum 280 |
| Maximum permissible mass declared | — | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 118.5 in · 3,010 mm | 116.1 in · 2,950 mm | — |
| Length declared | 234.3 in · 5,950 mm | 216.0 in · 5,487 mm | +8% Magnum 280 |
| Width declared | — | 118.6 in · 3,012 mm | — |
| Height declared | 126.0 in · 3,200 mm | 121.1 in · 3,075 mm | — |
| Ground clearance declared | — | 15.9 in · 405 mm | — |
| Fuel tank declared | — | 540.0 qt · 511.0 L | — |
Case-IH Magnum 280 sources
Source
- Source: Traktorenlexikon, “Case-IH Magnum 280”
- Source: OECD test report 2979, 2016
John Deere 8410 sources
Source
- Source: Traktorenlexikon, “John Deere 8410”
- Source: OECD test report 1936, 2000