3 material differences · fewer than 12
Tractor oneCase-IH Magnum 2802005–2011No measured PTO figureTractor twoJohn Deere 83302006–2009No measured PTO figure
Which should you choose?
Read our verdict on the Magnum 280 and the 8330 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
3 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Magnum 280 | 8330 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 275 hp | 266.5 hp | — |
| Engine declared | — | John Deere PowerTech-Plus 6.090 HRW-02 | — |
| Displacement declared | — | 8.98 L | — |
| Maximum torque declared | 949 lb·ft · 1,287 N·m | 836 lb·ft · 1,133 N·m | +14% Magnum 280 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 43.9 gpm · 166 L/min | — | — |
| Pressure declared | 3,046 psi · 210 bar | 3,002 psi · 207 bar | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 28,440 lb · 12,900 kg | 23,307 lb · 10,572 kg | +22% Magnum 280 |
| Maximum permissible mass declared | — | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 118.5 in · 3,010 mm | 120.1 in · 3,050 mm | — |
| Length declared | 234.3 in · 5,950 mm | 233.8 in · 5,938 mm | — |
| Width declared | — | 118.6–125.6 in · 3,012–3,190 mm | — |
| Ground clearance declared | — | 13.2 in · 336 mm | — |
| Fuel tank declared | — | 720.0 qt · 681.4 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH Magnum 280 sources
- Source: Traktorenlexikon, “Case-IH Magnum 280”
- Source: OECD test report 2979, 2016
John Deere 8330 sources
- Source: Traktorenlexikon, “John Deere 8330”