Case-IH 7240 PRO/8940 vs Massey Ferguson MF 8450

12 material differences

Tractor one

1997–1999

No measured PTO figure

Tractor two

2004–2008

No measured PTO figure

Which should you choose?

Read our verdict on the 7240 PRO/8940 and the MF 8450 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH 7240 PRO/8940 and Massey Ferguson MF 8450, field by field
Field	7240 PRO/8940	MF 8450	Gap
Engine
Engine power, claimed claimed	235.8 hp	212.1 hp	+11% 7240 PRO/8940
Engine declared	CUMMINS 6 TA-830	SISU-Power 74.288 ETA	differs
Displacement declared	8.27 L	7.37 L	+12% 7240 PRO/8940
Maximum torque declared	725 lb·ft · 983 N·m	638 lb·ft · 865 N·m	+14% 7240 PRO/8940
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Case-IH multi-plate clutch running in oil bath	—	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	29.7 gpm · 112.4 L/min	39.6 gpm · 150.0 L/min	+33% MF 8450
Pressure declared	2,451 psi · 169 bar	2,176 psi · 150 bar	+13% 7240 PRO/8940
Three-point lift at ends declared	15,759 lb · 7,148 kg	23,605 lb · 10,707 kg	+50% MF 8450
Rear PTO speeds declared	1000 rpm	540/1000/540E rpm	differs
Weight & dimensions
Unladen weight declared	18,170 lb · 8,242 kg	19,930 lb · 9,040 kg	+10% MF 8450
Maximum permissible mass declared	25,519 lb · 11,575 kg	30,865 lb · 14,000 kg	+21% MF 8450
Wheelbase declared	118.3 in · 3,006 mm	121.1 in · 3,075 mm	—
Length declared	200.4 in · 5,090 mm	206.3 in · 5,240 mm	—
Width declared	120.0 in · 3,048 mm	100.4 in · 2,550 mm	+20% 7240 PRO/8940
Height declared	121.1 in · 3,077 mm	122.0 in · 3,100 mm	—
Ground clearance declared	19.3 in · 489 mm	18.5 in · 470 mm	—
Fuel tank declared	379.4–470.2 qt · 359.0–445.0 L	697.4 qt · 660.0 L	differs

Source

Source