8 material differences · fewer than 12
Tractor oneCase-IH 7240 PRO/89401997–1999No measured PTO figureTractor twoFendt 927 Vario2006–2015No measured PTO figure
Which should you choose?
Read our verdict on the 7240 PRO/8940 and the 927 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 7240 PRO/8940 | 927 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 235.8 hp | 236 hp | — |
| Engine declared | CUMMINS 6 TA-830 | — | — |
| Displacement declared | 8.27 L | — | — |
| Maximum torque declared | 725 lb·ft · 983 N·m | 811 lb·ft · 1,100 N·m | +12% 927 Vario |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 31.1–37.3 mph · 50–60 km/h | differs |
| Clutch declared | Case-IH multi-plate clutch running in oil bath | — | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 29.7 gpm · 112.4 L/min | — | — |
| Pressure declared | 2,451 psi · 169 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 18,170 lb · 8,242 kg | 22,223 lb · 10,080 kg | +22% 927 Vario |
| Maximum permissible mass declared | 25,519 lb · 11,575 kg | 39,683 lb · 18,000 kg | +56% 927 Vario |
| Wheelbase declared | 118.3 in · 3,006 mm | 120.1 in · 3,050 mm | — |
| Length declared | 200.4 in · 5,090 mm | 222.6 in · 5,655 mm | +11% 927 Vario |
| Width declared | 120.0–153.1 in · 3,048–3,890 mm | 108.3 in · 2,750 mm | differs |
| Ground clearance declared | 19.3 in · 489 mm | 20.1 in · 510 mm | — |
| Fuel tank declared | 379.4–470.2 qt · 359.0–445.0 L | 697.4 qt · 660 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 7240 PRO/8940 sources
- Source: Traktorenlexikon, “Case-IH 7240 PRO/8940”
- Source: Traktorenlexikon, “Case-IH 7230 PRO/8930”
Fendt 927 Vario sources
- Source: Traktorenlexikon, “Fendt 927 Vario”
- Source: OECD test report 2544, 2010