Case-IH 7240 PRO/8940 vs Case-IH MX 220

10 material differences · fewer than 12

Tractor one

1997–1999

No measured PTO figure

Tractor two

1999–2002

209.2 hp

Measured at the PTO · OECD Test 1892

Which should you choose?

Read our verdict on the 7240 PRO/8940 and the MX 220 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH 7240 PRO/8940 and Case-IH MX 220, field by field
Field	7240 PRO/8940	MX 220	Gap
Measured performance
PTO power, measured measured	—	209.2 hp	—
Drawbar power, measured measured	—	180.8 hp	—
Engine
Engine power, claimed claimed	235.8 hp	221.0 hp	+7% 7240 PRO/8940
Engine declared	CUMMINS 6 TA-830	Consolidated Diesel Company 6TAA-830	differs
Displacement declared	8.27 L	8.27 L	—
Maximum torque declared	725 lb·ft · 983 N·m	712 lb·ft · 966 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Case-IH multi-plate clutch running in oil bath	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	29.7 gpm · 112.4 L/min	31.1 gpm · 117.7 L/min	—
Pressure declared	2,451 psi · 169 bar	3,408 psi · 235 bar	+39% MX 220
Three-point lift at ends declared	15,759 lb · 7,148 kg	—	—
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	18,170 lb · 8,242 kg	20,025 lb · 9,083 kg	+10% MX 220
Maximum permissible mass declared	25,519 lb · 11,575 kg	30,865 lb · 14,000 kg	+21% MX 220
Wheelbase declared	118.3 in · 3,006 mm	118.3 in · 3,006 mm	—
Length declared	200.4 in · 5,090 mm	222.0 in · 5,640 mm	+11% MX 220
Width declared	120.0 in · 3,048 mm	120.0 in · 3,048 mm	—
Height declared	121.1 in · 3,077 mm	127.9 in · 3,249 mm	+6% MX 220
Ground clearance declared	19.3 in · 489 mm	14.9 in · 378 mm	+29% 7240 PRO/8940
Fuel tank declared	379.4–470.2 qt · 359.0–445.0 L	528.3 qt · 500.0 L	differs

Source

Source