Case-IH 7230 PRO/8930 vs New Holland 8770 A

10 material differences · fewer than 12

Tractor one

1997–1999

No measured PTO figure

Tractor two

1993–2002

No measured PTO figure

Which should you choose?

Read our verdict on the 7230 PRO/8930 and the 8770 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH 7230 PRO/8930 and New Holland 8770 A, field by field
Field	7230 PRO/8930	8770 A	Gap
Engine
Engine power, claimed claimed	211.1 hp	187.3 hp	+13% 7230 PRO/8930
Engine declared	CUMMINS 6 TA-830	NEW HOLLAND 675-TA-VH	differs
Displacement declared	8.27 L	7.48 L	+11% 7230 PRO/8930
Maximum torque declared	614 lb·ft · 833 N·m	632 lb·ft · 857 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	29.7 gpm · 112.4 L/min	33.3 gpm · 126.1 L/min	+12% 8770 A
Pressure declared	2,451 psi · 169 bar	2,495 psi · 172 bar	—
Three-point lift at ends declared	13,530 lb · 6,137 kg	16,491 lb · 7,480 kg	+22% 8770 A
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	17,864 lb · 8,103 kg	19,286 lb · 8,748 kg	+8% 8770 A
Maximum permissible mass declared	25,519 lb · 11,575 kg	—	—
Wheelbase declared	118.3 in · 3,006 mm	118.3 in · 3,005 mm	—
Length declared	200.1 in · 5,083 mm	197.9 in · 5,027 mm	—
Width declared	120.0 in · 3,048 mm	112.0 in · 2,845 mm	+7% 7230 PRO/8930
Height declared	119.2 in · 3,027 mm	122.8 in · 3,118 mm	—
Ground clearance declared	17.3 in · 439 mm	20.0 in · 509 mm	+16% 8770 A
Fuel tank declared	379.4–470.2 qt · 359.0–445.0 L	439.6 qt · 416.0 L	differs

Source

Source