10 material differences · fewer than 12

Tractor oneCase-IH 7230 PRO/89301997–1999No measured PTO figureTractor twoJohn Deere 82101999–2002No measured PTO figure

Which should you choose?

Read our verdict on the 7230 PRO/8930 and the 8210 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH 7230 PRO/8930 and John Deere 8210, field by field
Field	7230 PRO/8930	8210	Gap
Engine
Engine power, claimed claimed	211.1 hp	212.1 hp	—
Engine declared	CUMMINS 6 TA-830	John Deere-PowerTech 6.081 HRW-13	differs
Displacement declared	8.27 L	8.13 L	—
Maximum torque declared	614 lb·ft · 833 N·m	667 lb·ft · 905 N·m	+9% 8210
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated hydraulic wet John Deere multi-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	29.7 gpm · 112.4 L/min	31.8 gpm · 120.4 L/min	+7% 8210
Pressure declared	2,451 psi · 169 bar	3,379 psi · 233 bar	+38% 8210
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	17,864 lb · 8,103 kg	19,350 lb · 8,777 kg	+8% 8210
Maximum permissible mass declared	25,519 lb · 11,575 kg	30,865 lb · 14,000 kg	+21% 8210
Wheelbase declared	118.3 in · 3,006 mm	116.1 in · 2,950 mm	—
Length declared	200.1 in · 5,083 mm	216.0 in · 5,487 mm	+8% 8210
Width declared	120.0–153.1 in · 3,048–3,890 mm	118.6–127.3 in · 3,012–3,233 mm	differs
Height, over the cab declared	119.2 in · 3,027 mm	121.7 in · 3,090 mm	—
Ground clearance declared	17.3 in · 439 mm	16.5 in · 420 mm	—
Fuel tank declared	379.4–470.2 qt · 359.0–445.0 L	540.0 qt · 511.0 L	differs

Source

Source