10 material differences · fewer than 12
Tractor oneCase-IH 7230 PRO/89301997–1999No measured PTO figureTractor twoDeutz-Fahr DX 8.301983–1988No measured PTO figure
Which should you choose?
Read our verdict on the 7230 PRO/8930 and the DX 8.30 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 7230 PRO/8930 | DX 8.30 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 211.1 hp | 217 hp | — |
| Engine declared | CUMMINS 6 TA-830 | KHD BF6L 413 FR | differs |
| Displacement declared | 8.27 L | 9.57 L | +16% DX 8.30 |
| Maximum torque declared | 614 lb·ft · 833 N·m | 597 lb·ft · 810 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | — | Pedal operated wet ZF multi-disc clutch with oil-hydraulic Voith turbo coupling | — |
| Hydraulics & hitch | |||
| Pump flow declared | 29.7 gpm · 112.4 L/min | 21.4 gpm · 81 L/min | +39% 7230 PRO/8930 |
| Pressure declared | 2,451 psi · 169 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 1084 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 17,864 lb · 8,103 kg | 20,393 lb · 9,250 kg | +14% DX 8.30 |
| Maximum permissible mass declared | 25,519 lb · 11,575 kg | 26,455 lb · 12,000 kg | — |
| Wheelbase declared | 118.3 in · 3,006 mm | 118.6 in · 3,012 mm | — |
| Length declared | 200.1 in · 5,083 mm | 213.7 in · 5,427 mm | +7% DX 8.30 |
| Width declared | 120.0–153.1 in · 3,048–3,890 mm | 98.4 in · 2,500 mm | differs |
| Ground clearance declared | 17.3 in · 439 mm | 22.6 in · 575 mm | +31% DX 8.30 |
| Fuel tank declared | 379.4–470.2 qt · 359.0–445.0 L | 422.7 qt · 400 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 7230 PRO/8930 sources
- Source: Traktorenlexikon, “Case-IH 7230 PRO/8930”
Deutz-Fahr DX 8.30 sources
- Source: Traktorenlexikon, “Deutz-Fahr DX 8.30”
- Source: Traktorenlexikon, “Deutz-Fahr DX 230”