Case-IH 7210 PRO/8910 vs VALMET 8400

14 material differences

Tractor one

1997–1999

No measured PTO figure

Tractor two

1993–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 7210 PRO/8910 and the 8400 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH 7210 PRO/8910 and VALMET 8400, field by field
Field	7210 PRO/8910	8400	Gap
Engine
Engine power, claimed claimed	168 hp	138.1 hp	+21% 7210 PRO/8910
Engine declared	CUMMINS 6 T-830	Valmet 620 DS	differs
Displacement declared	8.27 L	6.60 L	+25% 7210 PRO/8910
Maximum torque declared	453 lb·ft · 614 N·m	384 lb·ft · 520 N·m	+18% 7210 PRO/8910
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Oil-immersed multi-plate clutch with nine plates	Pedal operated dry Fichtel & Sachs single plate clutch	differs
Hydraulics & hitch
Pump flow declared	29.8 gpm · 112.8 L/min	19.3 gpm · 73.2 L/min	+54% 7210 PRO/8910
Pressure declared	2,451 psi · 169 bar	2,031–2,248 psi · 140–155 bar	differs
Three-point lift at ends declared	11,960 lb · 5,425 kg	15,576 lb · 7,065 kg	+30% 8400
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	17,236 lb · 7,818 kg	11,111 lb · 5,040 kg	+55% 7210 PRO/8910
Maximum permissible mass declared	25,519 lb · 11,575 kg	19,842 lb · 9,000 kg	+29% 7210 PRO/8910
Wheelbase declared	118.3 in · 3,006 mm	100.7 in · 2,558 mm	+18% 7210 PRO/8910
Length declared	197.6 in · 5,020 mm	190.7 in · 4,844 mm	—
Width declared	112.0 in · 2,845 mm	90.5 in · 2,298 mm	+24% 7210 PRO/8910
Height declared	117.8 in · 2,992 mm	109.8 in · 2,790 mm	+7% 7210 PRO/8910
Ground clearance declared	15.9 in · 404 mm	20.1 in · 510 mm	+26% 8400
Fuel tank declared	380.4–470.2 qt · 360.0–445.0 L	174.4 qt · 165.0 L	differs

Source

Source