Case-IH 7210 PRO/8910 vs Hürlimann SX 1350

14 material differences

Tractor one

1997–1999

No measured PTO figure

Tractor two

1998–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 7210 PRO/8910 and the SX 1350 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH 7210 PRO/8910 and Hürlimann SX 1350, field by field
Field	7210 PRO/8910	SX 1350	Gap
Engine
Engine power, claimed claimed	168 hp	133.2 hp	+26% 7210 PRO/8910
Engine declared	CUMMINS 6 T-830	SAME-DEUTZ-FAHR 1000.6 WT-3 V1	differs
Displacement declared	8.27 L	6.00 L	+38% 7210 PRO/8910
Maximum torque declared	453 lb·ft · 614 N·m	358 lb·ft · 485 N·m	+27% 7210 PRO/8910
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Oil-immersed multi-plate clutch with nine plates	Hydraulic wet multi-disc clutch	differs
Hydraulics & hitch
Pump flow declared	29.8 gpm · 112.8 L/min	28.8 gpm · 109.0 L/min	—
Pressure declared	2,451 psi · 169 bar	3,046 psi · 210 bar	+24% SX 1350
Three-point lift at ends declared	11,960 lb · 5,425 kg	15,432 lb · 7,000 kg	+29% SX 1350
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	17,236 lb · 7,818 kg	14,771 lb · 6,700 kg	+17% 7210 PRO/8910
Maximum permissible mass declared	25,519 lb · 11,575 kg	23,149 lb · 10,500 kg	+10% 7210 PRO/8910
Wheelbase declared	118.3 in · 3,006 mm	108.3 in · 2,750 mm	+9% 7210 PRO/8910
Length declared	197.6 in · 5,020 mm	170.1 in · 4,320 mm	+16% 7210 PRO/8910
Width declared	112.0 in · 2,845 mm	96.5 in · 2,450 mm	+16% 7210 PRO/8910
Height declared	117.8 in · 2,992 mm	113.4 in · 2,880 mm	—
Ground clearance declared	15.9 in · 404 mm	20.5 in · 520 mm	+29% SX 1350
Fuel tank declared	380.4–470.2 qt · 360.0–445.0 L	243.0–401.5 qt · 230.0–380.0 L	differs

Source

Source