Case-IH 4240 (PRO) vs ZETOR 9111/9145

7 material differences · fewer than 12

Tractor one

Case-IH 4240 (PRO)

1993–1998

No measured PTO figure

Tractor two

ZETOR 9111/9145

1985–1990

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (39%); they were not built in overlapping years (1993–1998; 1985–1990). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

7 material differences · 7 fields identical or within 5%, which is not counted as material

Case-IH 4240 (PRO) and ZETOR 9111/9145, field by field
Field4240 (PRO)9111/9145Gap
Engine
Engine power, claimed claimed88.8 hp86.8 hp
Engine declaredIHC D-268 or D-268/68ZETOR Z-8002.1134differs
Displacement declared4.39 L4.56 L
Maximum torque declared232 lb·ft · 315 N·m242 lb·ft · 328 N·m
Transmission
Top speed declared18.6 mph · 30 km/h18.6–24.9 mph · 30–40 km/hdiffers
Clutch declaredPedal-operated dry single-plate clutch
Hydraulics & hitch
Pump flow declared12.6 gpm · 47.6 L/min
Pressure declared2,828 psi · 195 bar
Three-point lift at ends declared7,374 lb · 3,345 kg7,330 lb · 3,325 kg
Rear PTO speeds declared540/1000 rpm540/1000 rpm
Weight & dimensions
Unladen weight declared6,691 lb · 3,035 kg9,321 lb · 4,228 kg+39% 9111/9145
Maximum permissible mass declared12,125 lb · 5,500 kg
Wheelbase declared88.0 in · 2,235 mm93.9 in · 2,385 mm+7% 9111/9145
Length declared148.0 in · 3,759 mm163.0 in · 4,140 mm+10% 9111/9145
Width declared73.0 in · 1,854 mm76.4 in · 1,940 mm
Height declared105.0 in · 2,666 mm104.5 in · 2,655 mm
Ground clearance declared20.3 in · 515 mm11.8 in · 300 mm+72% 4240 (PRO)
Turning radius, braked declared12.1 ft · 3.70 m
Fuel tank declared118.3 qt · 112.0 L132.1 qt · 125.0 L+12% 9111/9145

Case-IH 4240 (PRO) sources

Source
  • Source: Traktorenlexikon, “Case-IH 4240”

ZETOR 9111/9145 sources

Source
  • Source: Traktorenlexikon, “Zetor 9111/9145”